PCB-054210-01543
    zoom_out_map

      PCB-054210-01543

      • DMS miniature measuring washer
        for the measurement of static forces,
      • Screw diameter 10 mm,.
      • Measuring range 54 kN,
      • Nominal 1.5 mV / V,.
      • Integrated cable, length 1.5 m,
        ending on open ends

       

      basic data
      measurement range12.139,68 lb54 kN[2]
       
      factor1,50 mV / V [1] [2]
       
      linearity error±5% FS [1]
       
      hysteresis±5% FS [1]
       
      repeatability±2% FS [1]
       
      Resonance frequency10,000 Hz  
      conditions of use
      Overload limit18.210 lb81 kN 
       
      Temperature range (operation)0 …200 °F18 … 93 ° C 
       
      temperature range (offset)not specified  
       
      Influence of temperature on the output (max)±0, 02% of measured value / ° F±0, 036% of reading / ° C[3]
       
      temperature effect on zero signal deviation (maximum)±0. 02% FS / ° F/±0, 036% FS / ° C[1]
      technical characteristics
      Bridge resistance350Ω [2]
       
      Supply voltage (recommended)10V DC [4]
       
      output polaritypositive  
      physical properties
      Gr öße - diameter0,943 in23,952 mm 
       
      size - height0,420 in10,668 mm 
       
      screw diameter0,394 in10 mm 
       
      diameter of the bore hole0.40 in10.16 mm 
       
      sensor elementstrain  
       
      Electrical connectiontinned ends  
       
      cable exitside  
      notes
      [1]FS =. "Full Scale": full scale  
       
      [2]nominal  
       
      [3]over the compensated temperature range  
       
      [4]calibrated with 10 V DC supply voltage; Power supply with 5 … 20 V DC or V AC RMS possible  
      PCB-054210-01543

      Specific References

      Download

      0542xx-01xxx_drawing.pdf

      Technical drawing

      Download (466.12k)

      054210-01543_manual.pdf

      Operating instructions

      Download (882.24k)

      054210-01543_specs.pdf

      Technical data sheet

      Download (13.42k)