PCB-M1631-01C

PCB-M1631-01C

  • S type load cell,
  • Measuring range 2,500 N,
  • Nominal 2 mV / V,
  • Integrated cable, length 3 m,
    ending on open ends
  • ,

    basic data
    measuring range562 lb2,500 N[1]
     
    value (±10%)2 mV / V [2]
     
    linearity error≤0.15% FS  
     
    hysteresis≤0.15% FS  
     
    repeatability? 0.05 %RO  
     
    Resonance frequency2.200 Hz  
     
    creep error≤0.08%  
    conditions
    Ü berlastlimit843 lb3.750 N 
     
    maximum capacity < br(Seitlich einwirkende Kraft, FX oder FY) )56.2 lb250 N[4]
     
    maximum capacity < br(Biegemoment, MX oder MY)112,4 in-lb12.7 Nm[4]
     
    maximum capacity < br(Axiales Drehmoment, MZ)112.4 lb12.7 Nm[4]
     
    Temperature range (operation)0 … 200 °F18 … 93 ° C 
     
    temperature range (offset)75 … 150 ° F21 … 65 ° C 
     
    temperature impact on the Output (max)±0, 002% of reading / ° F±0, 0036% of reading / ° C[3]
     
    temperature effect on zero signal deviation (maximum)±0. 00?5 %FS/°F/±0, 027% FS / ° C[3]
    technical characteristics
    Bridge resistance350Ω [2]
     
    supply voltage (recommended)10 V DC [5]
     
    insulation resistance> 5,000 M ?  
     
    Zero signal deviation≤ 1% FS  
     
    output polaritypositive when pull  
    physical properties
    size -. Length2.0 in51.0 mm[6]
     
    size - height3.0 in76.2 mm 
     
    size - width1.0 in25.4 mm 
     
    Weight0.43 lb195 g 
     
    Housing materialaluminum  
     
    sensor elementstrain  
     
    stretch at full load0.0025 in0.05 mm 
     
    Wiringintegrated cable, length 3 m  
     
    cable outletside  
    notes
    [1]FS = "Full Scale": full scale  
     
    [2]nominal  
     
    [3]on the compensated Temperature range  
     
    [4]insulated load the load cell with the named power or with the designated moment < br(keine zusätzlichen Belastungen)  
     
    [5]calibrated with 10 V DC supply voltage; Power supply with 5 … 20 V DC or V AC RMS possible  
     
    [6]details of the dimensions : see technical drawing  

    6 other articles of the same category: