PCB-200C20
    zoom_out_map

      PCB-200C20

    • ICP® sensor for power measurement,
    • Measuring range 89 kN,
    • Sensitivity 56.2 mV / kN,
    • Frequency range 0.0003 … 40,000 Hz,
    • 10-32 female connector on the side
    • "
      basic data
      sensitivity (±15%)/0.25 mV / lb56.2 mV / kN
      measuring range (pressure)20,000 lb88,96 kN
      Maximum permissible static load (force)30,000 lb133,44 kN
      wide band resolution0.30 lb RMS1.3 N RMS[2]
      lower limiting frequency (-5%)0.0003 Hz[3]
      upper frequency limit40,000 Hz[5]
      linearity≤ 1% FS[4]
      conditions
      temperature range-65 … 250 ° F-54 … 121 ° C
      Temperature coefficient of sensitivity≤ 0.08 %/°F≤ 0,1≤4 %/°C
      technical
      Discharge charge time constant (at room temperature)≥ 2,000 s
      supply20 … 30 V DC[1]
      Constant power supply2… 20 mA
      output impedance≤ 100 Ω
      Bias voltage8 … 14 V DC
      Spectral noise (1 Hz)0.039 lb / √ Hz0.17 N / √ Hz[2]
      spectral noise (10 Hz)0.012 lb / √ Hz0,054 N / √ Hz[2]
      Spectral noise (100 Hz)0.0034 lb / √ Hz0.015 N / √ Hz[2]
      spectral noise (1,000 Hz)0,00088 lb / √ Hz0.0039 N / √ Hz[2]
      (Pressure) output polaritypositive
      physical properties
      rigidity63 lb/µin11 kN/µm[2]
      Size - diameter1.5 in38.1 mm
      size - height0.5 in12.7 mm
      mass3.1 oz88 grams
      Housing materialstainless steel
      sealinghermetic
      Electrical connection10-32-coaxial socket
      connection positionside
      Mounting thread1/4 "-28 threadedno equivalent
      notes
      [1]for the use of the full range, the supply voltage must be at least 25 V" DC is.
      [2]typically
      [3]calculated on the basis of discharging charging time constant
      [4]zero-based balancing line, determined using the method of least squares
      [5]suppose value determined on the basis of solid state Dynamics calculations
      [6]details: see PCBs Declaration of conformance PS023
      equipment
      080A81adhesive for thread lock-1
      081A06mounting bolts, 1/4 "28 to 1/4"-28 x 0.37 in long, BeCu, without shoulder-1
      081 B 20mounting bolts, with shoulder(1/4 "28 1/4"-28)-1
      084 B 23premium cap, convex (for model 200 20)-1
      M081A61mounting bolts 1/4 "28 M6 x 1-1
      (N) negative output polarity
      (W) waterproof cable connection
      electrical connectionsealed cable connection
      Cable exitside
      PCB-200C20

      Specific References

      Download

      200C20_drawing.PDF

      Technical drawing

      Download (137.45k)

      200C20_manual.PDF

      Operating instructions

      Download (1000.07k)

      200C20_specs.PDF

      Technical data sheet

      Download (80.09k)