PCB-200B02

PCB-200B02

  • ICP® sensor for power measurement,
  • Measuring range 445 N,
  • Sensitivity 11,2 µV / N,
  • Frequency range 0.001 … 75,000 Hz,
  • 10-32 female connector on the side
  • basic data
    sensitivity (±15%)50 mV / lb11.241 mV / kN
    (pressure) measuring range100 lb0,4448 kN
    Maximum permissible static load (force)600 lb2,669 kN
    wide band resolution0.002 lb RMS0,008896 N RMS[1]
    Lower limiting frequency (-5%)0.001 Hz[3]
    upper frequency limit75,000 Hz[4]
    linearity error≤ 1% FS[2]
    conditions
    temperature range-65 … 250 ° F-54 … 121 ° C
    temperature coefficient Temperature coefficient of sensitivity≤ 0.03 %/°F≤ 0,054 %/°C
    technical properties
    discharge charge time constant (at room temperature)≥ 500 s
    Supply20 … 30 V DC
    constant power supply2 … 20 mA
    Output impedance≤ 100 Ω
    Bias voltage8 … 14 V DC
    (Pressure) output polaritypositive
    physical properties
    stiffness11 lb/µin1.9 kN/µm[1]
    Size - diameter0,650 in16.51 mm
    size - height0.360 in9.14 mm
    Gr öße - diameter of the measuring surface0.500 in12.7 mm
    mass0.5 oz14 grams
    housing material Stainless steel
    sealinghermetically sealed
    electrical connection10-32-coaxial socket
    Connection positionside
    mounting thread10-32 female thread
    notes
    [1] Typically
    [2]zero-based balancing line, determined using the method of least squares
    [3]calculated on basis of discharging charging time constant
    [4]suppose value determined on the basis of solid state Dynamics calculations
    [5]details: see PCBs Declaration of conformance PS023
    equipment
    080A81adhesive for thread lock-1
    081B 05mounting bolts (10-32 on 10-32)-1
    084A83impact plate-1
    M081A62Mounting bolts, 10-32 to M6 x 1, BeCu, with shoulder-1
    (S) negative output polarity
    (W) waterproof cable connection
    Electrical connectionsealed cable connection
    Cable exitside

    6 other articles of the same category: