PCB-113B38

PCB-113B38

  • ICP® high frequency pressure sensor with INVAR-membrane /-housing,
  • Especially insensitive to temperature transients,
  • Beschleunigungskompensiert,
  • Measuring range 344,7 kPa,
  • Sensitivity 14.5 mV / kPa,
  • Lower limiting frequency 1.0 Hz,
  • 10-32 female connector
  • of of
    basic data
    measuring range (±5 V output range)50 psi344.7 kPa
    usable range (output range ±10 V)100 psi689,4 kPa[2]
    sensitivity (±15%)≥ 100 MΩ / psi14.5 mV / kPa
    maximum pressure1,000 psi6.895 kPa
    Resolution0.001 psi0.007 kPa
    resonance frequency≥ 400,000 Hz≥ 500, 000 Hz
    Rise time≤ 1.0 µs
    lower limiting frequency1.0 Hz
    linearity≤ 1.0% FS[1]
    Conditions of use
    acceleration sensitivity≤ 0.002 psi/g≤ 0,0014 kPa/(m/s²)
    temperature range (operation)-100 … 275 ° F-73 … 135 ° C
    Temperature coefficient of sensitivity≤ 0,1 %/°F≤ 0.18 %/°C
    maximum Thermal shock (for fraction of a second)3,000 ° F1.649 ° C
    maximum acceleration2,000 g pk19.614 m/s² pk
    Maximum shock resistance20,000 g pk196.140 m/s² pk
    Technical features
    output polarity (positive pressure)positive
    discharging charging time constant (at room temperature)0.5 … 1.0 s
    Supply20 … 30 V DC
    constant power supply2 … 20 mA
    output impedance< 100 Ω
    Bias voltage10 … 15 V DC
    Physical properties
    geometry of the sensor elementcompression principle
    sensor elementquartz
    GoäusematerialINVAR
    membraneINVAR
    sealinghermetically sealed welded
    Electrical connection10-32-coaxial socket
    dimensions (with mounting sleeve)0.2 oz6.0 grams
    notes
    [1]zero-based balancing line, determined using the method of least squares
    [2]for output range supply voltage up to 10 V must be at least 24 V DC. At low bias voltage of the sensor, no negative output range is usable up to-10 V.
    [3]details: see PCBs Declaration of conformance PS023
    equipment
    060A03installation sleeve, 5 /. 16-24-2A thread, 1/4 "hex, (stainless steel)-1
    060A05installation sleeve, M7 x 0.75-6 g-thread-1
    065A02sealing ring f for flush mounting, 0,248 "outside x 0.219" x 0.015 "tall, brass3

    30 other articles of the same category: