PCB-113B32

PCB-113B32

  • ICP® high frequency pressure sensor with INVAR-membrane /-housing,
  • Especially insensitive to temperature transients,
  • Beschleunigungskompensiert,
  • Measuring range 34.475 kPa,
  • Sensitivity 0.145 mV / kPa,
  • Lower limiting frequency 1.0 Hz,
  • 10-32 female connector
  •  

    basic data
    measuring range (±5 V output range)5,000 psi34.475 kPa 
     
    usable range (output range ±10 V)10,000 psi68.950 kPa[2]
     
    sensitivity (±0, 05 mV / psi)1.0 mV / psi0.145 mV / kPa 
     
    maximum pressure15,000 psi103.425 kPa 
     
    Resolution0,02 psi0.14 kPa 
     
    resonance frequency≥400,000 Hz  
     
    rise time (reflected pressure)≤ 1.5 µs  
     
    Lower limiting frequency1.0 Hz  
     
    linearity≤1.0% FS [1]
    conditions of use
    Acceleration sensitivity≤ 0.002 psi/g≤ 0,0014 kPa/(m/s²) 
     
    temperature range (operation)-100 … 275 ° F-73 … 135 ° C 
     
    Temperature coefficient of sensitivity≤ 0,1 %/°F≤0.18 %/°C 
     
    maximum shock (for fraction of a second)3,000° F1,650 ° C 
     
    maximum acceleration2,000 g pk19.614 m/s 2 pk 
     
    Maximum shock resistance20,000 g pk196.140 m/s² pk 
    Technical properties
    Output polarity (positive pressure)positive  
     
    Discharging charging time constant (at room temperature)0.3 … 1,0 s  
     
    supply20 … 30 V DC  
     
    Constant power supply2 … 20 mA  
     
    output impedance< 100Ω  
     
    Bias voltage8 … 14 V DC  
    Physical properties
    Geometry of the sensor elementcompression principle  
     
    Sensor elementquartz  
     
    housing materialINVAR  
     
    membraneINVAR  
     
    Sealedsealeddensely welded  
     
    electrical connection10-32-coaxial socket  
     
    mass0.2 oz6.0 grams 
    Notes
    [1]zero-based balancing line, determined using the method of least squares  
     
    [2]for output range supply voltage up to 10 V must be at least 24 V DC. At low bias voltage of the sensor, no negative output range is usable up to-10 V.  
     
    [3]details: see PCBs Declaration of conformance PS023  
    equipment
    060A03installation sleeve, 5 /. 16-24-2A thread, 1/4 "hex, (stainless steel)-1 
     
    060A05installation sleeve, M7 x 0.75-6 g-thread-1 
     
    065A02sealing ring f for flush mounting, 0,248 "outside x 0.219" x 0.015 "high brass3 
     
    065A05gasket spacer, 0,248" outside x 0,221 "x 0.240" high, 17-4 (Stainless steel)-1 
    (S) Emralon coating
    coatingEmralon  
     
    electricIsolation>100 MΩ  
     
    equipment   
     
    065A08insulation ring, 0.250 "outside x 0,218" x 0.027 "high, anodized aluminium3 
     
    065A22seal, 0.250" x outside 0,218 "x 0.015" high, Torlon or Vespel3 
    (W) Watertight cable connection
    equipment   
     
    060A03installation sleeve, 5/16-24-2A thread, 1/4 "hex, (stainless steel)-1 
    (WM) waterproof cable connection
    equipment   
     
    060A05installation sleeve, M7 x 0.75-6 g-thread-1 

    30 other articles of the same category: