basic data |
Measurement range (output range ± 5 V) | 10 psi | 190.7 dB | |
|
Usable overload range (output range is ± 10 V) | 20 psi | 196.7 dB | [1] |
|
Sensitivity (± 15%) | 500 mV / psi | 72.5 mV / kPa | |
|
maximum pressure | 250 psi | 1724 kPa | |
|
resolution | 0.06 mpsi | 86.3 dB | |
|
resonant frequency | ≥13.000 Hz | | |
|
rise time | ≤25 microseconds | | |
|
Lower limit frequency (-5%) | 5 Hz | | |
|
linearity error | ≤2,0% FS | | [2] |
Operating conditions |
acceleration sensitivity | ≤0,0005 psi / g | ≤0,0035 kPa / (m / s) | |
|
The temperature range (operation) | -100 ... 250 ° F | -73 ... 121 ° C | |
|
Temperature coefficient of sensitivity | ≤0,2% / ° F | ≤0,36% / ° C | |
|
Maximum temperature shock (for split second) | 1000 ° F | 538 ° C | |
|
Maximum shock resistance | 1.000 g pk | 9807 m / s pk | |
Technical characteristics |
Output polarity (positive pressure) | positive | | |
|
Discharging time (at room temperature) | ≤0,1 s | | |
|
supply voltage | 20 ... 30 V DC | | |
|
Constant current supply | 2 ... 20 mA | | |
|
output impedance | ≤100 Ω | | |
|
Bias voltage | 7 ... 13 V DC | | |
physical properties |
sensor element | ceramics | | |
|
housing material | stainless steel | | |
|
membrane | 316L (stainless steel) | | |
|
seal | epoxy resin | | |
|
electrical connection | integrated cable | | |
|
cable termination | tinned | | |
|
Dimensions | 0.115 oz | 3,260 grams | |
|
cable type | Stranded wires, 32 AWG | | |
|
cable length | 15 in | 38.1 cm | |
Hints |
[1] | For an output range up to 10 V, the supply voltage at least 24 V has to DC , respectively. At low bias voltage of the sensor, no negative output range up to -10 V can be used. | | |
|
[2] | Zero-based line of best fit, determined by the method of least squares | | |
included supply |
061A04 | clamp | -2 | |
|
065A66 | Adhesive mounting ring | -3 | |
(M) Metric assembly |
included supply | | | |
|
M061A04 | clamp | -2 |