PCB-357A08/NC
basic data | |||
sensitivity (±20%) | 0.35 pC/g | 0.036 pC/(m/s²) | |
range | ± 1.000 g PK | ±9. 800 m/s² pk | |
Frequency range (+ 5%) | ,12,000 Hz | [2] | |
frequency range (+ 10%) | ,20,000 Hz | [2] | |
Resonance frequency | ≥ 70,000 Hz | ||
linearity | ≤ 1% | [3] | |
transverse acceleration sensitivity | ≤ 5% | ||
Conditions of use | |||
(shock) overload limit | ± 10.000 g pk | ±98.100 m/s² PK | |
Temperature range | -100 … 350 ° F | -73 … 177 ° C | |
technical | |||
capacity | 140 pF | [1] | |
Insulation resistance (at 21 ° C) | > 10,000 M Ω | ||
Output polarity | negative | ||
electrical insulation (base) | ≥100 MΩ | ||
physical properties | |||
sensor element | Ceramic | ||
geometry of the sensor element | shear principle | ||
housing material | aluminum | ||
Waterproofing | epoxy resin | ||
size - height | 0.11 in | 2.8 mm | |
size - diameter | 0.16 in | 4.1 mm | |
Size - width | 0.27 in | 6.9 mm | |
mass | 0.006 oz | 0.16 grams | [1] |
electric Connection | 3-56 coaxial plug | ||
connection position | side | ||
notes | |||
[1] | typically | ||
[2] | the lower cut-off frequency depends on the used signal conditioning electronics. | ||
[3] | zero-based balancing line, determined with the methodthe least squares | ||
equipment | |||
039A29 | transfer tool | -1 | |
080A109 | mounting wax | -1 | |
ACS-1 | frequency response, traceable to NIST (10 Hz up to the upper 5% point) | -1 | |
(P) positive output voltage | |||