PCB-357E92

PCB-357E92

  • Vibration sensor with charge output,
  • Continuous use temperature up to 649 ° C,
  • With drill through,
  • Measuring range 1000 g,
  • Sensitivity 2.3 pC/g,.
  • Upper cutoff frequency 2.500 Hz,
  • Integrated hardline cable, length 3 m,
    ending on 10-32 socket,
  • New: Slim 10-32 socket (diameter 6. 35 mm)

< tr>Maximum exposure (integrated neutron flux)10.000.000.000 N / cm² 
Specifications
Basic dataEnglish unitsSI units 
Sensitivity (±10 %)2.3 pC/g0.23 pC/(m/s²) 
Measuring range±1.000 gPK±9.800 m/s²PK 
Upper frequency limit (≤5 %)2.500 Hz 
Upper cutoff frequency (±1 dB)4.000 Hz 
Resonance frequency≥15.000 Hz 
Linearity error (based on total measuring range)≤2,5 % 
Transverse acceleration sensitivity≤5 % 
Conditions of use
Overload limit (shock)±2.000 gPK±19.600 m/s²PK 
Temperature range (operation)-67... 1200 °F-55... 649 ° C 
Temperature range (load limit)-67... 1,400 ° F-55... 760 ° C 
Temperature range (connector)-67... 900 ° F-55... 482 ° C 
Maximum exposure (integrated gamma flux)100,000,000 wheel 
Technical characteristics
capacity1,000 pF[2] [1]
Isolation resistance (at 649 ° C)≥10 kΩ 
Isolation resistance (at 21 ° C)  
Output polarityNegative[3]
Electrical insulationSignal from the housing isolated 
Physical properties
Sensor elementUHT-12™ 
Geometry of the sensor elementShear principle 
Housing materialInconel 
Sealing (sensor housing)Hermetic 
Sealing (connector)Hermetically sealed welded 
Size - height0.56 in14.2 mm 
Size - length0.95 in24.1 mm 
Size - width0.56in14.2 mm 
Weight (without cable)1.6 oz45 grams[1]
Electrical connectionIntegrated hardline cable 
Cable length10 ft3 m 
Cable termination10-32-coaxial socket 
FixingThrough hole 
Notes
[1]Typically  
[2]Plus approx. 330 pF per additional meter cable  
[3]Negative signal for positive acceleration  
Included accessories
081A116Mounting screw, 10-32 UNJF-3A, length 5/8 ", Inconel 718(1)
ACS-1Frequency response, traceable to NIST (10 Hz up to the upper 5%-Punkt)(1)

13 other articles of the same category: