PCB-357C72

PCB-357C72

  • Vibration sensor with charge output,
  • Continuous use temperature up to 482 ° C,
  • Decay,
  • Measuring range 500 g
  • Sensitivity 50 pC/g,
  • Upper limit frequency 2.500 Hz,
  • 2-pin female connector on the side
  • basic data
    sensitivity (±5%)50 pC/g5.1 pC/(m/s²)
    range±500 g pk ±4. 905 m/s 2 pk
    frequency range (±5%)2,500 Hz[4]
    Resonance frequency≥ 13,000 Hz
    Linearity≤ 1%[1]
    transverse acceleration sensitivity≤ 5%[3]
    Conditions of use
    Overload limit (shock)±2. 000 g pk±19. 620 m/s² pk
    Temperature range-65 … 900 ° F-54 … 482 ° C
    strain sensitivity (footprint)0.033 g/µε 0.32 (m/s²)/µε[2]
    maximum radiation exposure (integrated neutron flux)10.000.000.000 N / cm 2
    maximum Radiation effect(integrated gamma River)100,000,000 wheel
    Technical
    capacity (from pin to pin)945 pF[2]
    capacity (of pin housing)26 pF[2]
    capacity (asymmetry between the pins)≤ 2 pF
    insulation resistance (from pin to pin at 21 ° C)> 1000 M Ω
    Insulation resistance (from pin on housing at 21 ° C)≥ 100 MΩ[2]
    insulation resistance (from pin to pin 482 ° C)> 100 kΩ
    output polaritydifferential
    physical properties
    sensor elementceramic
    Sealinghermetically sealed
    size - height1.25 in31.8 mm
    size -. Diameter0.75 in19 mm
    dimensions3.15 oz90 grams[2]
    wiring7/16-272-pin
    connection positionside
    mounting3 holes
    notes
    [1]zero-based balancing line, determined using the method of least squares
    [2]typically
    [3]Transverse acceleration sensitivity typically ≤ 3%
    [4]the lower cut-off frequency depends on the used signal conditioning electronics.
    Equipment
    081A99screw-3
    ACS-1frequency response, rückf ührbar on NIST (10 Hz up to the upper 5% point)-1

    4 other articles of the same category: