PCB-357A63

PCB-357A63

  • Vibration sensor with charge output
  • Continuous use temperature up to 482 ° C
  • Radiation-resistant
  • Measuring range 5,000 g
  • Sensitivity 0.53 pC/g
  • Upper frequency limit 10,000 Hz
  • 10-32 socket side

Specifications
Basic dataEnglish unitsSI units 
Sensitivity (±10 %)0.53 pC/g0,054 pC/(m/s²) 
Measuring range±5.000 g pk±49.050 m/s² pk 
Frequency range (±10 %)10,000 Hz[2]
Resonance frequency45,000 Hz[1]
Linearity error≤1 %[3]
Transverse acceleration sensitivity<3% 
Conditions of use
Overload limit (shock)±5.000 g pk±49.050 m/s² pk 
Temperature range-65... 900 ° F-54... 482 ° C 
Strain sensitivity (footprint)0.003 g/µε0.02 (m/s²)/µε[1]
Maximum exposure (integrated neutron flux)10.000.000.000 N / cm² 
Maximum exposure (integral gamma River)100,000,000 wheel 
Technical properties
capacity60 pF[1]
insulation resistance (at 21 ° C)> 1 GΩ 
insulation resistance (at 482 ° C)> 1 MΩ 
output polarityPositive 
electrical insulationinsulated signal from the housing 
physical properties
sensor elementUHT-12™ 
Geometry of the sensor elementshear principle 
Housing materialInconel 
Sealinghermetic 
Size - height0.4 in10.2 mm 
Size - length0.4 in10.2 mm 
Size - width0.4 in10.2 mm 
Mass0.31 oz8.7 grams[1]
Electrical connection10-32-coaxial socket 
Connecting positionside 
Mounting screw5-40 female 
information
[1]Typically  
[2]The lower cut-off frequency depends on the used signal conditioning electronics.  
[3]Zero-balance just, determined using the method of least squares  
Included accessories
64287-01Mounting bolts 5-40 on 10-32(2)
ACS-44Frequency response calibration(1)

4 other articles of the same category: