PCB-EX(M)607A01
    zoom_out_map

      PCB-EX(M)607A01

    • Industrial ICP® vibration sensor,
    • With ATEX / CSA approval,
    • Measurement range 50 g,
    • Sensitivity 100 mV/g,
    • Frequency range 0.5 … 10,000 Hz,
    • One-point calibration at 100 Hz,
    • 2-pin connector side, freely adjustable
    • basic data
      sensitivity (±15%)100 mV/g10.2 mV/(m/s²)[1]
      measuring range±50 g±490 m / s²
      Frequency range (± 3 dB)30 … 600,000 cpm0.5 … 10,000 Hz
      resonance frequency1,080 kcpm18,000 Hz[2]
      Wide band resolution350 µg3.434 µm / s ²[2]
      linearity≤1%[3]
      Lateral acceleration sensitivity≤ 7%
      Conditions of use
      Overload limit (shock)5,000 g pk49,050 m/s² pk
      Temperature range-65 … 250 ° F-54 … 121 ° C
      protection classIP68
      approval for potentially explosive atmospheresExIA IIC T4, AExia IIC, T4
      approval for potentially explosive atmosphere & embellishment; renEEx nL IIC T4,-40 ° C ≤ Ta ≤ 121 ° C, II 1 G
      approval for use in potentially explosive atmospheresCL I, div I, groups A, B, C, D CL
      II, div I, groups E, F, G Cl
      III , Div I
      approval for use in potentially explosive atmospheresCL I, div 2, groups A, B, C, D
      ExnL IIC T4, AExnA IIC T4
      admission f for potentially explosive atmospheresEEx nL IIC T4,-40 ° C ≤ Ta ≤ 121 ° C, II 3 G
      technical characteristics
      settling time (on bias voltage ± 1%)≤ 2.0 s
      discharging charging time constant≥ 0.3 s
      power18 … 28 V DC
      Constant power supply2 … 20 mA
      output impedance< 150 Ω
      Bias voltage8 … 12 V DC
      spectral noise (10 Hz)8 µg / √ Hz78.5 (µm / s &) sup2;)/ √ Hz[2]
      spectral noise (100 Hz)5 µg / √ Hz49,1 (µm / s ²) / √ Hz[2]
      spectral noise (1,000 Hz)4 µg / √ Hz39.2 (µm / s ²) / √ Hz[2]
      electrical insulation (housing)≥ 100 MΩ
      physical properties
      Size - hex7/8 in22 mm
      size - height1.23 in31.2 mm
      mass3.7 oz 105 grams
      fixingmounting bolt
      mounting thread¾-16 female thread[4]
      Mounting torque (mounting bolts)7 … 8 ft-lb9.5 … 10.8 Nm[5] [6]
      Assembly torque (hex nut)2 … 5 ft-lb2.7 … 6.8 Nm
      sensor elementceramic
      Geometry of the sensor elementshear principle
      housing materialstainless steel
      Sealinghermetically sealed welded
      electrical connection2-pin connector (MIL-C-5015)
      Connection positionside
      notes
      [1]conversion factor 1 g = 9.81 m/s²
      [2] Typically
      [3]zero-based balancing line, determined using the method of least squares
      [4]no equivalent in SI
      [5]Assembly requires Allen key 1/8 "(for inch mounting bolts) or 3 mm (for metric mounting bolts).
      [6]of the mounting bolts must be tightened with a higher torque than the hex nut, so that the sensor can easily be removed.
      [7]details: see PCBs Declaration of conformance PS023 and PS060
      Accessories
      080A162mounting bolts¾-16 on 1/4"-28-1
      ICS-2single point calibration at 100 Hz (traceable to NIST)-1
      (M) metric mounting
      " Accessories
      M080A163mounting bolts M6 x ¾-16 1-1
      PCB-EX(M)607A01

      Specific References

      Download

      EX607A01_manual.PDF

      Operating instructions

      Download (6.3M)