PCB-(M)629A30

PCB-(M)629A30

  • Triaxial industrial ICP® vibration sensor,
  • With through hole,
  • Measuring range 500 g
  • Sensitivity 10 mV / g,
  • Frequency range 0.8 … 8,000 Hz,
  • Frequency response calibration,
  • 4-pin bayonet connector on the side
  • "
    basic data
    sensitivity (±5%)10 mV / g1 mV/(m/s²)[6]
    measuring range≤500 Ω±4. 905 m/s 2
    Frequency range (±5%)144 … 120,000 cpm2.4 … 2,000 Hz[2] [3]
    frequency range (± 10%)102 … 300,000 cpm 1.7 … 5,000 Hz
    frequency range (± 3 dB)48 … 480,000 cpm0.8 … 8,000 Hz
    resonance frequency1.200 kcpm 20,000 Hz[1]
    wide band resolution316 µg3,100 µm / s ²[1]
    linearity≤1%[4]
    Transverse acceleration sensitivity≤ 5%
    conditions of use
    Overload limit (shock)5,000 g PK49,050 m/s² pk
    Temperature range-65 … 250 ° F-54 … 121 ° C
    technical
    settling time(on bias voltage ± 1%)≤ 3.0 s
    Discharging charging time constant≥ 0.2 s
    power18 … 28 V DC
    Constant power supply2 … 20 mA
    output impedance< 100 Ω
    Bias voltage8 … 12 V DC
    Spectral noise (10 Hz)22.1 µg / √ Hz217 (µm / s ²) / √ Hz[1]
    spectral noise (100 Hz)8.9 µg /. √ Hz87,3 (µm / s ²) / √ Hz[1]
    spectral noise (1,000 Hz)3.2 µg / √ Hz31.4 (µm / s ²) / √ Hz[1]
    Electrical protectionRFI/ESD
    Electrical insulation (housing)≥ 100 MΩ
    physical properties
    size - length1.5 at38.1 mm
    Size - width1.5 in38.1 mm
    size - height0.82 in20.8 mm
    dimensions (without cord)4.9 oz139 grams
    Mounting thread1/4"-28No metric equivalent[5]
    Assembly torque2 … 5 ft-lb2.7 … 6.8 Nm
    Sensor elementceramic
    geometry of the sensor elementshear principle
    housing material Stainless steel
    sealinghermetically sealed welded
    electrical connection4-pin connector (MIL-C-26482)
    Connection positionside
    pin assigNment (PIN A)X-axis
    pin assigNment ( PIN B)y
    pin assigNment (PIN C)Z axis
    pin assigNment (pin D)mass
    Notes
    [1]Typically
    [2]the upper cut-off frequency tolerance: ±10%
    [3]1 Hz 60 = cpm ("Cycles Per Minute": turns pro) Minute).
    [4]zero-based balancing line, determined using the method of least squares
    [5]mounting with M6 screw possible
    [6]conversion factor 1 g = 9.81 m/s²
    [7]details: see PCBs Declaration of conformance PS023
    Accessories supplied
    081A56mounting screw 1/4 "-28 x 0.75"-1
    ICS-5frequency response for Triaxial sensors from 10 Hz up to the upper 5% frequency-1
    (M) metric mounting
    equipment
    M081A59metric mounting screw-1

    15 other articles of the same category: