PCB-(M)605B02

PCB-(M)605B02

  • Biaxialer industrial ICP® vibration sensor,
  • With through hole,
  • Measuring range 10 g,
  • Sensitivity500 mV / g,
  • Frequency range 0.5 … 3,000 Hz,
  • One-point calibration at 100 Hz,
  • 3-pin female connector on the side
  • "
    basic data
    sensitivity (±20%)500 mV / g51 mV/(m/s²)[5]
    measuring range± 10 g±98 m / s²
    Frequency range (± 3 dB)30 … 180,000 cpm0.5 … 3,000 Hz[2]
    resonance frequency600 kcpm10,000 Hz[1]
    Wide band resolution150 µg1,471 µm / s ²[1]
    linearity≤1%[3]
    Transverse acceleration sensitivity≤ 5%
    Conditions of use
    Overload limit (shock)5,000 g pk49,050 m/s² pk
    Temperature range-65 … 250 ° F-54 … 121 ° C
    protection classIP68
    Technical characteristics
    settling time (on bias voltage ± 1%)≤ 5.0 s
    discharging charging time constant≥ 0.3 s
    Power18 … 28 V DC
    constant power supply2 … 20 mA
    Output impedance< 500 Ω
    Bias voltage8 … 12 V DC
    Spectral noise (10 Hz)8 µg / √ Hz78.5 (µm / s ²) / √ Hz[1]
    spectral noise (100 Hz)3 µg / √ Hz29.4 ( µm / s ²) / √ Hz[1]
    spectral noise (1,000 Hz)3 µg / √ Hz29.4 (µm / s ²) / √ Hz[1]
    electrical insulation (Housing)≥ 100 MΩ
    Physical properties
    size - diameter1.38 in34.9 mm
    size - height1.00 in25.4 mm
    Dimensions (without cable)3.9 oz110.6 grams
    mounting thread1/4 "-28 UNFno equivalent[4]
    Assembly torque2 … 5 ft-lb2.7 … 6.8 Nm
    sensor elementceramic
    geometry of the Sensor elementshear principle
    housing materialstainless steel
    sealinghermetically sealed welded
    Electrical connection3-Pin MIL-C-5015
    connection positionside
    Pin assigNment (PIN A)x
    pin assigNment (PIN B)Z axis
    pin assigNment (PIN C)dimensions
    Notes
    [1]typically
    [2]the upper cut-off frequency tolerance: ±10%
    [3]zero-based balancing line, determined using the method of least squares
    [4]mounting with M6 screw possible
    [5]conversion factor = 1 g9.81 m/s²
    [6]details: see PCBs Declaration of conformance PS023
    equipment
    081A68 Mounting screw 1/4 "-28 x 0.9"-1
    ACS-2 Tsingle point calibration at 100 Hz (traceable to NIST) for each axis in-1
    (M) metric Assembly
    equipment
    M081A68metric mounting bolt with M6 thread-1

    15 other articles of the same category: