PCB-340A75
basic data | |||
sensitivity (±15%) | 2.9 pC/g | 0.3 pC/(m/s²) | |
range | ±2. 300 g PK | ±22. 600 m/s² pk | |
frequency range (+ 5%) | ,12,000 Hz | [2] | |
Frequency range (+ 10%) | 16,000 Hz | [2] | |
frequency range (+ 3 dB) | 26,000 Hz | [2] | |
resonance frequency | ≥ 50,000 Hz | ||
Linearity error (1,600 g, 15,700 m/s²) | ≤ 1% | [3] | |
linearity | ≤ 2% | [3] | |
Transverse acceleration sensitivity | ≤ 5% | [4] | |
conditions | |||
(shock) overload limit | ± 10.000 g PK | ±98.100 m/s² pk | |
temperature | -95 … 500 ° F | 70 … 260 ° C | |
Strain sensitivity(Base area) | 0,002 g/µε | 0.02 (m/s²)/µε | [1] |
Technical properties | |||
capacity | 485 pF | [1] | |
Insulation resistance (at 260 ° C) | ≥ 100 MΩ | [1] | |
insulation resistance (at 21 ° C) | > 1.000.000 M Ω | ||
Output polarity | negative | ||
physical properties | |||
size - hex | 0.31 in | 8.0 mm | |
Size - height | 0.43 in | 10.9 mm | |
sensor element | ceramic | ||
geometry of the sensor element | shear principle | ||
Housing material | titanium | ||
sealing | hermetically sealed welded | ||
Mass | 0.07 oz | 2.0 grams | [1] |
electrical connection | M3-coaxial plug | ||
connection position | side | ||
Mounting thread | M3 x 0.50 male | ||
notes | |||
[1] | typically | ||
[2] | the lower cut-off frequency is determined by the used Signal conditioning electronics from. | ||
[3] | zero-based balancing line, determined using the method of least squares | ||
[4] | transverse acceleration sensitivity typically ≤ 3% | ||
equipment | |||
080A109 | mounting wax | -1 | |
ACS-1 | Frequency response, traceable to NIST (10 Hz up to the upper 5% point) | -1 | |
M080A15 | adhesive mounting | -1 | |
(J) mass insulation of | |||
frequency range (5%) | ,10,000 Hz | ||
13,500 Hz | frequency range (10%) | ||
Resonance frequency | > 49,000 Hz | ||
electrical insulation | ≥ 100 MΩ | ||
size - hex | 0.39 in | 10.0 mm | |
Size - height | 0.48 in | 12.1 mm | |
mass | 0.11 oz | 3.0 grams | |
(P) positive Ausgangspolarit ät | |||