PCB-(M)225C
    zoom_out_map

      PCB-(M)225C

    • ICP® force measuring element,
    • Measuring range 53 … 156 kN,
    • Sensitivity 31.5 mV / kN,
    • Frequency range 0.0003 … 6,000 Hz,
    • 10-32 female connector on the side
    • basic data
      sensitivity (±15%)0.14 mV / lb31,47 mV / kN
      measuring range (pressure)35,000 lb155,69 kN
      Measuring range (traction)12,000 lb53,38 kN
      maximum permissible static load (force)42,500 lb189,05 kN
      Maximum permissible static load (traction)15,000 lb66.73 kN
      wide band resolution0.1 lb RMS0,445 N RMS[1]
      Lower limiting frequency (-5%)0.0003 Hz[2]
      upper frequency limit6,000 Hz[4]
      linearity error≤ 1.5% FS[3]
      conditions
      temperature range-65 … 250 ° F-54 … 121 ° C
      Temperature coefficient of sensitivity≤ 0.03 %/°F≤ 0,054 %/°C
      technical properties
      discharge charge time constant (at room temperature)≥ 2,000 s
      Supply20 … 30 V DC
      constant power supply2 … 20 mA
      Output impedance≤ 100 Ω
      Bias voltage8 … 14 V DC
      Spectral noise (1 Hz)0,0204 lb / √ Hz0,0911 N / √ Hz[1]
      spectral noise (10 Hz)0,00986 lb / √ Hz0,0440 N / √ Hz[1]
      spectral noise (100 Hz)0,00328 lb / √ Hz0,0146 N / √ Hz[1]
      spectral noise (1,000 Hz)0,00110 lb / √ Hz0,00491 N / √ Hz[1]
      (pressure) output polaritypositive
      physical properties
      stiffness6 lb /. µin1.05 kN/µm[1]
      size - diameter1.58 in40,13 mm
      size - height3.00 in76.2 mm
      Weight14.5 oz412 g
      housing materialstainless steel
      sealinghermetic
      Electrical connection10-32-coaxial socket
      connection positionside
      Mounting thread¾-16 female
      notes
      [1]typically
      [2]on the basis of discharging charging time constant calculated
      [3]zero-based balancing line, determined using the method of least squares
      [4]assume that value to determine Solid state Dynamics calculations based on
      [5]details: see PCBs Declaration of conformance PS023
      (M) metric mounting
      (S) negative output polarity
      (W) waterproof cable
      wiring Sealed cable connection
      Cable outletOn the side
      PCB-(M)225C

      Specific References

      Download

      225C_drawing.PDF

      Technical drawing

      Download (48.95k)

      225C_manual.PDF

      Operating instructions

      Download (905.68k)

      225C_specs.PDF

      Technical data sheet

      Download (69.7k)