PCB-356A66
    zoom_out_map

      PCB-356A66

    • Triaxial ICP® vibration sensor,
    • With built-in low-pass filter,
    • Measuring range 500 g
    • Sensitivity 10 mV / g,
    • Frequency range 2 … 4,000 Hz,
    • 4-pin female connector on the side
    • "
      basic data
      sensitivity (±10%)10 mV / g1.02 mV/(m/s²)
      range±500 g pk ±4. 900 m/s² pk
      frequency range (±5%)2 … 4,000 Hz[2] [3]
      Resonance frequency≥ 35,000 Hz
      integrated filterfirst order
      edge steepness of the filter6 dB / Octave[1]
      electric filter corner frequency16,000 Hz[1]
      wide band resolution0.002 g RMS0.02 m/s² RMS[1]
      Linearity≤ ±1%[4]
      transverse acceleration sensitivity≤ 5%
      conditions of use
      Overload limit (shock)±7. 000 g pk±68. 600 m/s² PK
      Temperature range (operation)-65 … 250 ° F-54 … 121 ° C[7]
      strain sensitivity (base area)0.001 g/µε0.01 (m/s²)/µε[1]
      specifications
      power supply22 … 30 V DC[5]
      Constant power supply2 … 20 mA
      output impedance≤200Ω
      Bias voltage 7 … 15 V DC[6]
      discharging charging time constant0.1 … 1,0 s
      settling time
      ( on bias voltage ±10%)
      < 3 s
      spectral noise (1 Hz)450 µg / √ Hz4.415 (µm / s ²) / √ Hz[1]
      Spectral noise (10 Hz)100 µg / √ Hz981 (µm / s ²) / √ Hz[1]
      spectral noise (100 Hz)25 µg / √ Hz245 (µm / s ²)) / √ Hz[1]
      spectral noise (1,000 Hz)20 µg / √ Hz196 (µm / s ²) / √ Hz[1]
      physical properties
      Sensor elementceramic
      geometry of the sensor elementshear principle
      housing materialtitanium
      Sealinghermetically sealed
      size - height0.55 in14.0 mm
      size e length0,80 in20.3 mm
      size - width0.55 in14.0 mm
      weight0.32 oz9.0 grams[1]
      Wiring1/4 "-28 4-pin
      connection positionside
      mounting thread10-32 female thread
      Assembly torque10 … 20 in-lb113 … 225 NCM
      notes
      [1]typically
      [2]The upper cut-off frequency tolerance: ±500 Hz
      [3]the frequency response of the X-axis is limited because the installation method.
      [4]zero-based balancing line, determined using the method of least squares
      [5]the full measuring range can only when sufficient high power supply be used.
      [6]the TEDS option increases the bias voltage to 1 v
      [7]the data for temperatures above 121 ° C applies only for transducers with HT option.
      [8]details: see PCBs Declaration of conformance PS023
      equipment
      080A109mounting wax-1
      080A12adhesive mounting-1
      081 B 05Mounting bolts (10-32 on 10-32)-1
      ACS-1Tfrequency response for Triaxial sensor, r & menu; ckführbar on NIST, 10 Hz up to the upper 5% frequency-1
      M081B05mounting bolts 10-32 to M6 x 0.75-1
      (HT) High temperature electronics
      temperature range-65 … 325 ° F-54 … 163 ° C
      (T) TEDS memory in accordance with IEEE PP1451. 4
      (TLA) TEDS LMS International - free format
      (TLB) TEDS LMS international - format for the automotive industry
      (TLC) TEDS LMS international - format for the aviation industry
      PCB-356A66

      Specific References

      Download

      356A66_drawing.PDF

      Technical drawing

      Download (41.9k)

      356A66_manual.PDF

      Operating instructions

      Download (1.75M)

      356A66_specs.PDF

      Technical data sheet

      Download (95.82k)