PCB-102B14

Cryogenic ICP® pressure sensor, 5000 psi, 1 mV/psi, 3/8-24 mtg thd, ground isolated with safety wire holes

Measurement Range: 5 kpsi (34475 kPa)
Sensitivity: (±15%)1.0 mV/psi (0.145 mV/kPa)
Low Frequency Response: (-5%)0.25 Hz
Resonant Frequency: >=250 kHz (>=250 kHz)
Electrical Connector: 10-32 Coaxial Jack
Weight: 0.388 oz (11.00 gm)

Specification Notes

[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Excitation voltage >=28 volts required.
[4] See PCB Declaration of Conformance PS023 for details.

	English:	SI:
Performance
Measurement Range (for ±5V output)	5 kpsi	34475 kPa
Useful Overrange (for ± 10V output)	10 kpsi	68950 kPa	[3]
Sensitivity (±15 %)	1.0 mV/psi	0.145 mV/kPa
Maximum Pressure (Total)	15 kpsi	103425 kPa
Resolution	100 mpsi	0.690 kPa	[2]
Resonant Frequency	≥250 kHz	≥250 kHz
Rise Time (Reflected)	≤2.0 µ sec	≤2.0 µ sec
Low Frequency Response (-5 %)	0.25 Hz	0.25 Hz
Non-Linearity	≤1.0 % FS	≤1.0 % FS	[1]
Environmental
Acceleration Sensitivity	≤0.002 psi/g	≤0.0014 kPa/(m/s²)
Temperature Range (Operating)	-320 to +212 °F	-196 to +100 °C
Temperature Coefficient of Sensitivity	≤0.06 %/°F	≤0.108 %/°C
Maximum Shock	20000 g pk	196133 m/s² pk
Electrical
Output Polarity (Positive Pressure)	Positive	Positive
Discharge Time Constant (at room temp)	≥2.0 sec	≥2.0 sec
Excitation Voltage	20 to 30 VDC	20 to 30 VDC
Constant Current Excitation	2 to 20 mA	2 to 20 mA
Output Impedance	<100 Ohm	<100 Ohm
Output Bias Voltage	9 to 13 VDC	9 to 13 VDC
Physical
Sensing Element	Quartz	Quartz
Housing Material	304L/316L Stainless Steel	304L/316L Stainless Steel
Thread Adaptor Material	316L Stainless Steel	316L Stainless Steel
Diaphragm	316L Stainless Steel	316L Stainless Steel
Sealing	Welded Hermetic	Welded Hermetic
Electrical Connector	10-32 Coaxial Jack	10-32 Coaxial Jack
Weight	0.388 oz	11.00 gm