PCB-356A43

PCB-356A43

  • Triaxial ICP® miniature vibration sensor,
  • With TEDS 1.0,
  • Measuring range 500 g,
  • Sensitivity 10 mV / g,
  • Frequency range 0.4... 10,000 Hz,
  • Dimensions 4.2 grams,
  • 4-pin female connector on the side

Specifications
Basic dataEnglish unitsSI units 
Sensitivity (±10 %)10 mV / g1.02 mV/(m/s²) 
Measuring range±500 g pk±4.905 m/s² pk 
Frequency range (≤5 %)0.7... 7,000 Hz 
Frequency range (±10 %)0.4... 10,000 Hz 
Resonance frequency≥30.000 Hz 
Wide band resolution (1... 10,000 Hz)0.0008 g rms0.008 m/s² rms[1]
Linearity error≤1 %[2]
Transverse acceleration sensitivity≤6 % 
TEDS memory chips in accordance with
IEEE P1451. 4
Yes 
Conditions of use
Overload limit (shock)±5.000 g pk±49.050 m/s² pk 
Temperature range (operation)-65... 250 ° F-54... 121 ° C 
Strain sensitivity (footprint)0.001 g/µε0.01 (m/s²)/µε[1]
Technical characteristics
Supply voltage20... 30 V DC 
Constant power supply2... 20 mA 
Output impedance≤200Ω 
Bias voltage8... 12 V DC 
Discharge charge time constant0.8... 2.4 s 
Settling time (on area within ±10% of the bias voltage) 
Spectral noise (1 Hz)300 µg/√Hz2.943 (µm/s²)/√Hz[1]
Spectral noise (10 Hz)50 µg/√Hz491 (µm/s²)/√Hz[1]
Spectral noise (100 Hz)35 µg/√Hz343 (µm/s²)/√Hz[1]
Spectral noise (1,000 Hz)8 µg/√Hz79 (µm/s²)/√Hz[1]
Physical properties
Sensor elementCeramic 
Geometry of the sensor elementShear principle 
Housing materialTitanium 
SealingHermetic 
Size - height0.40 in10.2 mm 
Size - length0.40 in10.2 mm 
Size - width0.40 in10.2 mm 
Mass0.15 oz4.2 grams[1]
Electrical connection1/4 "-28 4-pin 
Connecting positionOn the side 
FixingAdhesive mounting

1]Typically  
[2]Zero-balance just, determined using the method of least squares  
[3]Details: see PCB Declaration of conformance PS023  
Included accessories
080A109Mount wax(1)
080A90Superglue(1)
ACS-1TFrequency response for Triaxial accelerometer, traceable to NIST, 10 Hz toto the upper 5% frequency(1)

30 other articles of the same category: