PCB-054224-01324
    zoom_out_map

      PCB-054224-01324

      • DMS miniature measuring washer
        for the measurement of static forces,
      • Screw diameter 24 mm.
      • Measuring range 320 kN
      • Nominal 1.5 mV / V,.
      • Integrated cable, length 1.5 m,
        ending on open ends
      of
      basic data
      measurement range71.942 lb320 kN[2]
      factor1,50 mV / V[1] [2]
      Linearitä avoidable±5% FS[1]
      hysteresis±5% FS[1]
      repeatability±2% FS[1]
      Resonance frequency10,000 Hz
      conditions of use
      Overload limit107.913 lb480 kN
      Temperature range (operation)0 …200 °F18 … 93 ° C
      Temperature range (offset)not specified
      influence of temperature on the output signal (maximum)±0, 02% of measured value / ° F ±0. 036% of reading / ° C[3]
      temperature influence on (max) zero signaldeviation/±0, 02% FS / °F/±0, 036% FS / ° C[1]
      technical Properties
      Bridge resistance350 Ω[2]
      supply voltage (recommended)10V DC[4]
      output polaritypositive
      physical properties
      Gr öße - diameter2,160 in54,86 mm
      size - height0,735 in18.67 mm
      screw diameter0,945 in24.00 mm
      diameter of the bore hole0,951 in24,16 mm
      sensor elementstrain
      Electrical connectiontinned ends
      cable exitside
      notes
      [1]FS =. "Full Scale": full scale
      [2]nominal
      [3]over the compensated temperature range
      [4]calibrated with 10 V DC supply voltage; Power supply with 5 … 20 V DC or V AC RMS possible
      PCB-054224-01324

      Specific References

      Download

      0542xx-01xxx_drawing.pdf

      Technical drawing

      Download (466.12k)

      054224-01324_specs.pdf

      Technical data sheet

      Download (13.47k)