This website uses cookies, which are necessary for the technical operation of the site and which are always set. In order to further improve our offer and our website, we would like to set additional cookies in order to collect anonymized data for statistics and analyzes. However, these are only set with your consent. Further information on cookies can be found in our privacy policy.

Privacy policy Acceptdone
    PCB-3711E11200G
    zoom_out_map

      PCB-3711E11200G

    • MEMS-DC acceleration sensor,
    • Suitable for measuring static accelerations,
    • Measuring range 200 g
    • Sensitivity 10 mV / g,
    • Typical frequency range 0 … 3,000 Hz,
    • Supply voltage 6 … 30 V DC,
    • 4-pin female connector on the side
      • basic data
      sensitivity (±3%)10 mV / g1.02 mV/(m/s²) 
       
      measuring range±200 gpk±1. 962 m/s² pk 
       
      Frequency range (± 3 dB)0 … 3,000 Hz [2]
       
      frequency range (± 3 dB)0 … 1500 Hz [3]
       
      Phase response< 10 °  
       
      wide band resolution (0,5 … 100 Hz)[2]0.04 m/s² rmsrms 4 mg
       
      Linearity error≤1% [1]
       
      transverse acceleration sensitivity≤5%  
      conditions
      Overload limit (Shock)±5. 000 g pk±49. 050 m / pk 
       
      Temperature range (operation)-65 … 250 ° F-54 … 121 ° C 
       
      temperature range (storage)-65 … 250 ° F-54 … 121 ° C 
       
      Temperature coefficient of sensitivity±3% [4]
       
      temperature coefficientzero±2% FSO [4] [5]
       
      strain sensitivity (footprint)0.001 g/µε0.01 (m/s²)/µε[2]
       
      Magnetic sensitivity100µg/Gs/9.8 (m/s²) / T[2]
      technical specifications
      power supply6 … 30 V DC  
       
      Power? 12 mA  
       
      output impedance? 120 ?  
       
      Spannungsoffset±80 mV DC [6]
       
      spectral noise (1 … 100 Hz)500 µg / √Hz4.905 (µm / s ²) / √Hz[2]
       
      electrical insulation (base)>100 MΩ  
      physical properties
      housing materialtitanium  
       
      Sealinghermetically sealed  
       
      size - height0.45 in11.4 mm 
       
      Gr öße - L &AmericanCatholic.org; length0.85 in21.6 mm 
       
      size - width0.85 in21.6 mm 
       
      mass0.58 oz16.3 grams 
       
      Electrical connection4-Pin  
       
      connectionon the side  
       
      mountingtwo through holes  
      Notes
      [1]zero-based balancing line, determined using the method of least squares  
       
      [2]typically  
       
      [3]guaranteed; evidenced by calibration certificate supplied with  
       
      [4]-54 … 121 ° C, reference 24 ° C  
       
      [5]FSO = "Full Scale Output": maximum output signal of the measuring range (4 V DC).  
       
      [6]offset at 3 meters cable length (type 010)  
       
      [7]details: see PCB Declaration of Conformance PS027  
      Accessories supplied
      080A152mounting clip-1 
       
      081A113mounting screw with 4-40 thread2 
       
      M081A113mounting screw m2, 5 thread2 
       
      ACS-145Calibration of amplitude and phase of 2 Hz up to the upper ±3dB point-1 
      PCB-3711E11200G

      Specific References

      Download

      3711E11200G_drawing.PDF

      Technical drawing

      Download (200.7k)

      3711E11200G_manual.PDF

      Operating instructions

      Download (393.48k)

      3711E11200G_specs.PDF

      Technical data sheet

      Download (80.41k)