PCB-(M)205C

PCB-(M)205C

  • ICP® power measurement washer,
  • Measuring range 267 kN,
  • Sensitivity 18 mV / kN,
  • Frequency range 0.0003 … 50,000 Hz,
  • 10-32 female connector on the side
  • basic data
    sensitivity (±15%)0.08 mV / lb17.98 mV / kN 
     
    measuring range (pressure)60,000 lb266.9 kN 
     
    Maximum permissible static load (force)70,000 lb311.4 kN 
     
    wide band resolution1 lb RMS4.45 N RMS[1]
     
    Lower limiting frequency0.0003 Hz [2]
     
    upper frequency limit50,000 Hz [4]
     
    linearity error≤ 1.5% FS [3]
    conditions
    temperature range-65 … 250 ° F-54 … 121 ° C 
     
    Temperature coefficient of sensitivity≤ 0.10 %/°F≤0.18 %/°C 
    technical properties
    discharge charge time constant (at room temperature) ≥ 2,000 s  
     
    Supply voltage20 … 30 V DC  
     
    constant power supply2 … 20 mA  
     
    output impedance≤100 Ω  
     
    Bias voltage8 … 14 V DC   
     
    Spectral noise (1 Hz)0,0981 lb / √Hz0.44 N / √Hz[1]
     
    spectral noise (10 Hz)0,0306 lb / √Hz0.14 N / √Hz[1]
     
    Spectral noise (100 Hz)0,00709 lb / √Hz0.032 N / √Hz[1]
     
    spectral noise (1,000 Hz)0,00192 lb / √Hz0,00857 N / √Hz[1]
     
    (Pressure) output polaritypositive  
    physical properties
    12,000 lb53,379 kNpreload 
     
    Stiffness40 lb/µin7 kN/µm[1]
     
    Size - diameter1,580 in40,13 mm 
     
    size - height0,510 in12.95 mm 
     
    Gr öße - inner diameter (hole diameter)0,830 in21.08 mm 
     
    Size - diameter of the measuring surface1.375 in34,93 mm 
     
    Dimensions2.7 oz77 grams 
     
    housing materialstainless steel  
     
    sealingHermetically sealed  
     
    electrical connection10-32-coaxial socket  
     
    connection positionside  
    Notes
    [1]typically  
     
    [2]calculated on the basis of discharging charging time constant  
     
    [3]zero-based balancing line, determined using the method of least squares  
     
    [4]suppose value determined on the basis of solid state Dynamics calculations  
     
    [5]details: see PCBs Declaration of conformance PS023  
    Equipment
    080A82grease-1 
     
    081A15mounting bolts, 5/8-18 x 1,650 ", BeCu-1 
     
    082 B 05washer (for models B 205 and 215 B)-1 
     
    083 B 05mounting sleeve (for the models 205 C and 215 B)-1 
    (M) metric mounting
    equipment   
     
    M081A15mounting studs, M16 x 1.50 x 1,650 ", BeCu-1 
     
    M083B05mounting sleeve-1 
    (N) ) Negative output polarity
        
    (W) waterproof cable connection
    electrical connectionsealed cable connection  
     
    Cable exitside  

    29 other articles of the same category: