PCB-(M)204C

PCB-(M)204C

  • ICP® power measurement washer,
  • Measuring range 178 kN,
  • Sensitivity 27 mV / kN,
  • Frequency range 0.0003 … 55,000 Hz,
  • 10-32 female connector on the side
  •  

    basic data
    sensitivity (±15%)

    0.12 mV / lb

    27 mV / kN 
     
    measuring range (pressure)40,000 lb177.92 kN 
     
    Maximum permissible static load (force)50,000 lb222.4 kN 
     
    wide band resolution0.80 lb RMS3.6 N RMS[1]
     
    Lower limiting frequency (-5%)0.0003 Hz [2]
     
    upper frequency limit55,000 Hz [4]
     
    linearity error≤ 1.5% FS [3]
    conditions
    temperature range-65 … 250 ° F-54 … 121 ° C 
     
    Temperature coefficient of sensitivity≤ 0.08 %/°F≤ 0.04 %/°C 
    technical properties
    discharge charge time constant (at room temperature) ≥ 2,000 s  
     
    Supply20 … 30 V DC  
     
    constant power supply2 … 20 mA  
     
    output impedance≤100 Ω  
     
    Bias voltage8 … 14 V DC  
     
    Spectral noise (1 Hz)0.088 lb / √Hz0.39 N / √Hz[1]
     
    spectral noise (10 Hz)0.025 lb / √Hz0.11 N / √Hz[1]
     
    spectral noise (100 Hz)0,0060 lb / √Hz0,0266 N / √Hz[1]
     
    spectral noise (1,000 Hz)0.0016 lb / √Hz0,00719 N / √Hz[1]
     
    (pressure) output polaritypositive  
    physical properties
    preload8,000 lb35,585 kN 
     
    stiffness29 lb/µin5 kN/µm[1]
     
    size - diameter1.34 in34 mm 
     
    Size - height0.47 in12 mm 
     
    size - inner diameter (hole diameter)0,660 in16.76 mm 
     
    Size - diameter of the measuring surface1.10 in28 mm 
     
    mass2.0 oz57 g 
     
    housing materialStainless steel  
     
    sealinghermetically sealed  
     
    electrical connection10-32-coaxial socket  
     
    Connection positionside  
    notes
    [1]typically  
     
    [2]based on the Calculated discharge charge time constant  
     
    [3]zero-based balancing line, determined using the method of least squares  
     
    [4]Accepted value determined on the basis of solid state Dynamics calculations  
     
    [5]details: see PCBs Declaration of conformance PS023  
    included Accessories
    080A82grease-1 
     
    081A14mounting bolts, 1/2 "-20 x 1,400", BeCu-1 
     
    082 B 04Washer (for models 204 C and 214 B)-1 
     
    083 B 04mounting sleeve (for the models 204 C and 214 B)-1 
    (M) metric mounting
    equipment   
     
    M081A14mounting Stud, M14 x 1.25 x 1,400 ", BeCu-1 
     
    M083B04mounting sleeve-1 
    (N) negative Output polarity
        
    (W) waterproof cable connection
    electrical connectionsealed cable connection  
     
    Cable exitside  

    29 other articles of the same category: