PCB-(M)626A04

PCB-(M)626A04

  • Industrial ICP® vibration sensor for seismic measurements,
  • Measuring range 0.5 g,
  • Sensitivity 10,000 mV / g,
  • Frequency range 0.04 … 500 Hz,
  • Frequency response calibration,
  • 2-pin female connector above
  • '
    basic data
    sensitivity (±5%)10 V / g1.02 V/(m/s²)[1]
    measurement range±0. 5 g±4, 9 m/s 2
    Frequency range (±5%)6 … 12,000 cpm0.1 …?200 ?z[5] [6]
    frequency range (± 10%)4 … 18,000 cpm0.07 … 300 Hz
    frequency range (± 3 dB)2 … 30,000 cpm0.04 … 500 Hz
    resonance frequency60 kcpm1,000 Hz[2]
    Wide band resolution0.5 µg5.0 µm / s ²[2]
    linearity≤1%[3]
    Lateral acceleration sensitivity≤ 5%
    Conditions of use
    Overload limit (shock)±40 g±392 m /
    Temperature range0 … 150 ° F18 … 65 ° C
    specifications
    power supply24 … 28 V DC
    Constant power supply2 … 10 mA
    output impedance< 500 Ω
    Bias voltage8 … 12 V DC
    Discharging charging time constant≥<5 s
    settling time (on bias voltage ± 1%)≤ 5 min
    spectral Noise (1 Hz)0.06 µg / √ Hz0.60 (µm / s ²) / √ Hz[2]
    spectral noise (10 Hz)0.02 µg / √ Hz0.20 (µm / s ²) / √ Hz[2 ]
    Spectral noise (100 Hz)0.01 µg / √ Hz0.10 (µm / s ²) / √ Hz[2]
    electrical insulation≥ 100 MΩ
    Electrical protectionRFI/ESD
    physical properties
    sensor elementceramic
    Geometry of the sensor elementbending principle
    Housing materialstainless steelCutoff frequency: ±10%
    [7]details: see PCBs Declaration of conformance PS023
    equipment
    081A40Mounting bolts with 1/4 "-28 thread-1
    ICS-1frequency response for uniaxial sensors from 10 Hz up to the upper 5% frequency-1
    (M) metric mounting
    equipment
    M081A61metric mounting bolts with M6 thread-1

    20 other articles of the same category: