PCB-(M)625B60

PCB-(M)625B60

  • Industrial ICP® vibration sensor,
  • With through hole,
  • Measuring range 500 g
  • Sensitivity 10 mV / g,
  • Frequency range 0.2 … 10,500 Hz,
  • Frequency response calibration,
  • Integrated armored cable, length 3 m,
    ending on cut end
  •  

    basic data
    sensitivity (±5%)10 mV / g1.0 mV/(m/s²)[6]
     
    measuring range≤500 Ω±4. 905 m/s 2 
     
    Frequency range (±5%)30 … 390,000 cpm0.5 … 6,500 Hz[5]
     
    frequency range (± 10%)22 … 450,000 cpm0.37 … 7,500 Hz 
     
    frequency range (± 3 dB)12 … cpm 630,0000.2 … 10,500 Hz 
     
    resonance frequency1,500 kcpm25,000 Hz[4]
     
    wide band resolution350 µg3.434 µm / s ²[4]
     
    linearity≤1% [1]
     
    Transverse acceleration sensitivity≤5%  
    conditions of use
    Overload limit (shock)5,000 g PK49,050 m/s² pk 
     
    temperature range-65 … 250 ° F-54 … 121 ° C 
     
    Protection classIP68  
    technical Properties
    settling time (on bias voltage ± 1%)≤ 8.0 s  
     
    discharging charging time constant≥ 1.0 s  
     
    Supply voltage18 … 28 V DC  
     
    constant power supply2 … 20 mA  
     
    Output impedance< 100Ω  
     
    Bias voltage8 … 12 V DC  
     
    spectral noise (10 Hz)15 µg / √Hz147 ( µm / s ²) / √ Hz[4]
     
    spectral noise (100 Hz)7 µg / √Hz69 (µm / s ²) / √Hz[4]
     
    spectral noise (1,000 Hz)4 µg / √Hz39 (µm / s ²) / √Hz[4]
     
    electrical protectionRFI/ESD  
     
    electrical insulation>100 MΩ  
    physical properties
    size - diameter1.38 in35.1 mm 
     
    Size - height1.13 in28.7 mm 
     
    dimensions (without cable)5.1 oz145 grams 
     
    mountinghole  
     
    Mounting thread1/4"-28no equivalent[2]
     
    Assembly torque2 … 5 ft-lb2.7 … 6.8 Nm 
     
    Sensor elementceramic  
     
    geometry of the sensor elementshear principle  
     
    housing materialStainless steel  
     
    sealinghermetically sealed welded  
     
    electrical connectionintegrated armoured cable  
     
    Cable exitside  
     
    cable length10 ft3.0 m 
     
    cable typepolyurethane [3]
    notes
    [1]zero-based balancing line, determined using the method of least squares  
     
    [2]Assembly with Possible M6 screw  
     
    [3]two-core cable with stainless steel reinforcement  
     
    [4]typically  
     
    [5]tolerance the upper cut-off frequency: ±10%  
     
    [6]conversion factor 1 g = 9.81 m/s²  
    Accessories
    080 B 45Temperature protection-1 
     
    081A73mounting screw 1/4 "-28 x 1.34"-1 
     
    ICS-1frequency response for uniaxial sensors from 10 Hz up to the upper 5% frequency-1 
    (M) metric mounting
    equipment   
     
    M081A73metric mounting screw with M6-thread-1 
    (TO) temperature output
    temperature range36 … 250 ° F2 … 121 ° C 
     
    transcription factor5.56 mV / ° F
    (zero point at 32 °F)
    10 mV / ° C 
     
    Connections (red wire)acceleration output  
     
    (black wire) pin assigNmentmass  
     
    Connector pin assigNment(white wire)Temperature output  
     
    Pin assigNment (green wire)ground  
    (LB) low bias voltage
    Bias voltage6 … 8 V DC  
     
    Power12 … 28 V DC  
     
    measuring range±350 g±3. 434 m/s² 

    20 other articles of the same category: