PCB-(M)625B01

PCB-(M)625B01

  • Industrial ICP® vibration sensor,
  • With through hole,
  • Measurement range 50 g,
  • Sensitivity 100 mV/g,
  • Frequency range 0.2 … 10,500 Hz,
  • Frequency response calibration,
  • 2-pin female connector on the side
  •  

    basic data
    sensitivity (±5%)100 mV/g10.2 mV/(m/s²)[5]
     
    measuring range±50 g±490 m / s² 
     
    Frequency range (±5%)30 … 390,000 cpm0.5 … 6,500 Hz[2]
     
    frequency range (± 10%)22 … 450,000 cpm0.37 … 7,500 Hz 
     
    frequency range (± 3 dB)12 … cpm 630,0000.2 … 10,500 Hz 
     
    resonance frequency1,500 kcpm25,000 Hz[1]
     
    wide band resolution50 µg491 µm / s ²[1]
     
    linearity≤1% [3]
     
    Transverse acceleration sensitivity≤5%  
    conditions of use
    Overload limit (shock)5,000 g pk 49,050 m/s² pk 
     
    temperature range-65 … 250 ° F-54 … 121 ° C 
     
    ProtectionIP68  
    technical characteristics
    settling time (on bias voltage ± 1%)≤ 8.0 s  
     
    discharging charging time constant≥ 1.0 s  
     
    power18 … 28 V DC  
     
    constant power supply2 … 20 mA  
     
    Output impedance< 100Ω  
     
    Bias voltage8 … 12 V DC  
     
    Spectral noise (10 Hz)2.5 µg / √Hz24.5 (µm / s ²) / √Hz[1]
     
    spectral noise (100 Hz)0.8 µg /. ? Hz7.8 (µm / s ²) / √Hz[1]
     
    spectral noise (1,000 Hz)0,5 µg / √Hz4.9 (µm / s ²) / √Hz[1]
     
    Electrical protectionRFI/ESD  
     
    Electrical insulation (housing)>100 MΩ  
    physical properties
    size -.Diameter1.36 in35.1 mm 
     
    size - height1.13 in28.7 mm 
     
    dimensions5.1 oz145 grams 
     
    Mountinghole  
     
    mounting thread1/4"-28no equivalent[4]
     
    " Mounting torque2 … 5 ft-lb2.7 … 6.8 Nm 
     
    sensor elementceramic  
     
    geometry of the sensor elementShear principle  
     
    housing materialstainless steel  
     
    sealinghermetically sealed welded  
     
    Electrical connection2-pin connector (MIL-C-5015)  
     
    connection positionside  
    notes
    [1]Typically  
     
    [2]the upper cut-off frequency tolerance: ±10%  
     
    [3]zero-based balancing line, determined with the method of least squares  
     
    pin assigNment (PIN C)temperature output  
    (LB) low bias voltage
    Bias voltage6 … 8 V DC  
     
    Power12 … 28 V DC  
     
    measuring range±35 g±343 m/s² 
    (CS) CSA-approved
    approval for use in potentially explosive atmospheresCL I, div I, groups A, B, C, D CL II, div I, groups E, F, G Cl III, div I  
     
    Approval for use in potentially explosive atmospheresExIA IIC T4, AExia IIC, T4  
     
    approval for use in potentially explosive atmospheresCL I, div 2, groups A, B, C, D ExnL IIC T4, AExnA IIC T4  

    20 other articles of the same category: