PCB-(M)607A11

PCB-(M)607A11

  • Industrial ICP® vibration sensor,
  • Measurement range 50 g,
  • Sensitivity 100 mV/g,
  • Frequency range 0.5 … 10,000 Hz,
  • One-point calibration at 100 Hz,
  • Free ausrichtbares integrated cable, length 3 m,
    ending on cut end
  • '"
    basic data
    sensitivity (±15%)100 mV/g10.2 mV/(m/s²)[6]
    measuring range±50 g±490 m / s²
    Frequency range (± 3 dB)30 … 600,000 cpm0.5 … 10,000 Hz
    resonance frequency1,500 kcpm25,000 Hz[1]
    Wide band resolution350 µg3.434 µm / s ²[1]
    linearity≤1%[4]
    Lateral acceleration sensitivity≤ 7%
    Conditions of use
    Overload limit (shock)5,000 g pk49,050 m/s² pk
    Temperature range-65 … 250 ° F-54 … 121 ° C
    protection classIP68
    technical characteristics
    Settling time (on bias voltage ± 1%)≤ 2 s
    discharging charging time constant≥ 0.3 sMounting thread1/2 "-20 female thread[5]
    Assembly torque (mounting bolts)3 … 4 ft-lb4.1 … 5.4 Nm[7] [8]
    Assembly torque (hex nut)2 … 3 ft-lb2.7 … 4.1 Nm
    Sensor elementceramic
    geometry of the sensor elementshear principle
    parts usematerialstainless steel
    sealinghermetically sealed welded
    wiringshed integrated cable
    cable exitside
    cable length10 ft3.0 m
    Cable typepolyurethane[3]
    notes
    [1]typically
    mounting bolts[2]
    [3]Screened two-wire cable with twisted wire
    [4]zero-based balancing line, determined withthe method of least squares
    [5]no equivalent in SI units
    [6]conversion factor 1 g = 9.81 m/s²
    [7]Assembly requires Allen key 1/8 "(for inch mounting bolts) or 3 mm (for metric mounting bolts).
    [8]of the mounting bolts must be tightened with a higher torque than the hex nut, so that the sensor can easily be removed.
    [9]details: see PCBs Declaration of conformance PS023 and PS060
    Accessories
    080A156mounting bolts 1/2 "-20 1/4" 28-1
    ICS-2single point calibration at 100 Hz (traceable to NIST)-1
    (M) metric mounting
    equipment
    M080A159Amounting bolts 1/2 "20 M6 x 1-1
    (TO) temperature output
    temperature range36 … 250 ° F2 … 121 ° C
    Transcription factor5.56 mV / ° F
    (zero point at 32 °F)
    10 mV / ° C
    electrical connectionpotted integrated cable
    Connections (red wire)acceleration output
    (black wire) pin assigNmentmass
    Pin assigNment (white wire)temperature output
    (EX) with ATEX approval
    approval for use in potentially explosive atmospheresExIA IIC T4 , AExia IIC, T4
    approval for use in potentially explosive atmospheresEEx nL IIC T4,-40 ° C ≤ Ta ≤ 121 ° C, II 1 G
    registration for use in potentially explosive atmospheresCL I, div I, groups A, B, C, D CL
    II, div I, groups E, F, G Cl
    III, div I
    approval for use in potentially explosive atmospheres CL I, div 2, groups A, B, C, D
    ExnL IIC T4, AExnA IIC T4
    approval for use in potentially explosive atmospheresEEx nL IIC T4,-40 ° C ≤ Ta ≤ 121 ° C, II 3 G

    29 other articles of the same category: