PCB-(M)607A01

PCB-(M)607A01

  • Industrial ICP® vibration sensor,
  • Measurement range 50 g,
  • Sensitivity 100 mV/g,
  • Frequency range 0.5 … 10,000 Hz,
  • One-point calibration at 100 Hz,
  • 2-pin connector side, freely adjustable
  • basic data
    sensitivity (±15%)100 mV/g10.2 mV/(m/s²)[6]
    measuring range±50 g±490 m / s²
    Frequency range (± 3 dB)30 … 600,000 cpm0.5 … 10,000 Hz
    resonance frequency1,080 kcpm18,000 Hz[1]
    Wide band resolution350 µg3.434 µm / s ²[1]
    linearity≤1%[2]
    Lateral acceleration sensitivity≤ 7%
    Conditions of use
    Overload limit (shock)5,000 g pk49,050 m/s² pk
    Temperature range-65 … 250 ° F-54 … 121 ° C
    protection classIP68
    technical characteristics
    Settling time (on bias voltage ± 1%)≤ 2.0 s
    discharging charging time constant≥ 0.3 s
    Power18 … 28 V DC
    constant power supply2 … 20 mA
    Output impedance< 150 Ω
    Bias voltage8 … 12 V DC
    Spectral noise (10 Hz)8 µg / √ Hz78.5 (µm / s ²) / √ Hz[1]
    spectral noise (100 Hz)5 µg / √ Hz 49.1 (µm / s ²) / √ Hz[1]
    spectral noise (1,000 Hz)4 µg / √ Hz39.2 (µm / s ²) / √ Hz[1]
    electric Insulation (housing)≥ 100 MΩ
    physical properties
    size - hex7/8 in22 mm
    size ße - height1.23 in31.2 mm
    mass3.7 oz105 grams
    fixingmounting bolt
    Mounting thread¾-16 female threadnoEquivalent[3]
    Assembly torque (mounting bolts)7 … 8 ft-lb9.5 … 10.8 Nm[4] [5]
    Assembly torque (hex nut )2 … 5 ft-lb2.7 … 6.8 Nm
    sensor elementceramic
    geometry of the sensor elementshear principle
    Housing materialstainless steel
    sealinghermetically sealed welded
    Electrical connection2-pin connector (MIL-C-5015)
    connection positionside
    notes
    [1]typically
    [2]zero-based balancing line, determined using the method of least squares
    [3]no equivalent in SI units
    [4]Assembly requires Allen key 1/8 "(for inch mounting bolts) or 3 mm (for metric mounting bolts).
    [5]of the mounting boltsmust be tightened with a higher torque than the hex nut, so that the sensor can easily be removed.
    [6]conversion factor 1 g = 9.81 m/s²
    [7]details: see PCBs Declaration of conformance PS023 and < a href = ""... "/ produkte_skript/downloads/ce/ps060.pdf" "class ="blue"> PS060
    equipment
    080A162mounting bolt ¾-16 on 1/4"-28-1
    ICS-2single point calibration at 100 Hz (traceable to NIST)-1
    (M) metric mounting
    equipment
    M080A163mounting bolts M6 x ¾-16 1-1
    (TO) temperature output
    temperature range36 … 250 ° F2 … 121 ° C
    Transcription factor5.56 mV / ° F
    (zero point at 32 °F)
    10 mV / ° C
    electrical connection3-Pin MIL-C-5015
    Pin assigNment (PIN A)acceleration output
    Pin assigNment (PIN B)dimensions
    pin assigNment (PIN C)temperature output
    (EX) with ATEX approval
    Approved for use in potentially explosive atmospheresExIA IIC T4, AExia IIC, T4
    approval for use in potentially explosive atmospheresEEx nL IIC T4, 40 ° C ≤ Ta ≤ 121 ° C, II 1 G
    approval for use in potentially explosive atmospheresCL I, div I, groups A, B, C, D CL
    II, div I, groups E, F, G Cl
    III, div I
    Approval for use in potentially explosive atmospheresCL I, div 2, groups A, B, C, D
    ExnL IIC T4, AExnA IIC T4
    approval for hazardous AtmospheresEEx nL IIC T4,-40 ° C ≤ Ta ≤ 121 ° C, II 3 G

    29 other articles of the same category: