PCB-(M)606B01

PCB-(M)606B01

  • Industrial ICP® vibration sensor,
  • With through hole,
  • Measurement range 50 g,
  • Sensitivity 100 mV/g,
  • Frequency range 0.5 … 10,000 Hz,
  • One-point calibration at 100 Hz,
  • 2-pin female connector on the side
  • "
    basic data
    sensitivity (±20%)100 mV/g10.2 mV/(m/s²)[5]
    measuring range±50 g±490 m / s²
    Frequency range (± 3 dB)30 … 600,000 cpm0.5 … 10,000 Hz[4]
    resonance frequency1,500 kcpm25,000 Hz[1]
    Wide band resolution350 µg3.434 µm / s ²[1]
    linearity≤1%[2]
    Transverse acceleration sensitivity≤ 7%
    conditions of use
    Overload limit (shock)5,000 g pk49,050 m/s² pk
    temperature range-65 … 250 ° F-54 … 121 ° C
    Type of protectionIP68
    Technical characteristics
    settling time (on bias voltage ± 1%)≤ 2.0 s
    discharging charging time constant≥ 0.3 s
    Power18 … 28 V DC
    constant power supply2 … 20 mA
    Output impedance< 150 Ω
    Bias voltage8 … 12 V DC
    Spectral noise (10 Hz)8 µg / √ Hz78.5 (µm / s ²) / √ Hz[1]
    spectral noise (100 Hz)5 µg / √ Hz49.1 (µm / s ²) / √ Hz[1]
    Spectral noise (1,000 Hz)4 µg / √ Hz39.2 (µm / s ²) / √ Hz[1]
    electrical insulation (housing)≥ 100 MΩ
    Physical properties
    size - diameter1.38 in35.1 mm
    size - height1.00 in25.4 mm
    Weight4.4 oz124 grams
    mountinghole
    Mounting thread1/4"-28no equivalent[3]
    Assembly torque2 … 5 ft-lb2.7 … 6.8 Nm
    sensor elementCeramic
    Geometry of the sensor elementshear principle
    housing materialstainless steel
    SealingHermetically sealed welded
    Electrical connection2-pin connector (MIL-C-5015)
    connection positionside
    notes
    [1]typically
    [2]zero-based balancing line, determined using the method of least squares
    [] 3]mounting with M6 screw possible
    [4]the upper cut-off frequency tolerance: ±10%
    [5]conversion factor 1 g = 9.81 m/s²
    [6]details: see PCBs Declaration of conformance PS023 and PS060
    equipment
    081A68mounting screw 1/4 "-28 x 0.9"-1
    ICS-2single point calibration at 100 Hz (traceable to NIST)-1
    (M) metric mounting
    equipment
    M081A68metric Mounting screw M6 thread-1
    (EX) with ATEX approval
    approval for use in potentially explosive atmospheresExIA IIC T4, AExia IIC, T4
    Approval for use in potentially explosive atmospheresEEx nL IIC T4,-40 ° C ≤ Ta ≤ 121 ° C, II 3 G
    approved for explosive atmosphere renEEx nL IIC T4,-40 ° C ≤ Ta ≤ 121 ° C, II 1 G
    approval for use in potentially explosive atmospheresCL I, div I, groups A, B, C, D CL
    II, div I, groups E, F, G Cl
    III , Div I
    approval for use in potentially explosive atmospheresCL I, div 2, groups A, B, C, D
    ExnL IIC T4, AExnA IIC T4

    29 other articles of the same category: