PCB-(M)603C02

PCB-(M)603C02

  • Industrial ICP® vibration sensor,
  • Measuring range 10 g,
  • Sensitivity500 mV / g,
  • Frequency range 0.5 … 3,000 Hz,
  • One-point calibration at 100 Hz,
  • 2-pin female connector above
  •  

    basic data
    sensitivity (±20%)500 mV / g51.0 mV/(m/s²)[5]
     
    measuring range± 10 g±98 m / s² 
     
    Frequency range (± 3 dB)30 … 180,000 cpm0.5 … 3,000 Hz[1]
     
    resonance frequency1,500 kcpm25,000 Hz[2]
     
    Wide band resolution300 µg2.943 µm / s ²[2]
     
    linearity≤1% [3]
     
    Transverse acceleration sensitivity≤ 7%  
    conditions of use
    Overload limit (shock)5,000 g pk49,050 m/s² pk 
     
    temperature range-65 …200 °F-54 … 93 ° C 
     
    Type of protectionIP68  
    Technical characteristics
    settling time (on bias voltage ± 1%)≤5.0 s  
     
    discharging charging time constant≥0.3 s  
     
    Power18 … 28 V DC  
     
    constant power supply2 … 20 mA  
     
    Output impedance< 500 Ω  
     
    Bias voltage8 … 12 V DC  
     
    Spectral noise (10 Hz)8 µg / √Hz78.5 (µm / s ²) / √Hz[2]
     
    spectral noise (100 Hz)3 µg / √Hz29.4 (µm / s ²) / √Hz[2]
     
    spectral noise (1,000 Hz)3 µg / √Hz29.4 (µm / s ²) / √Hz[2]
     
    electric Insulation (housing)>100 MΩ  
    physical properties
    size - Allen11/16 in18 mm 
     
    size ße - height1.65 in42.2 mm 
     
    size1.8 oz51 grams 
     
    mounting thread1/4 "-28 threadedno" metric equivalent[4]
     
    Assembly torque2 … 5 ft-lb2.7 … 6.8 Nm 
     
    sensor elementceramic  
     
    geometry the sensor elementshear principle  
     
    housing materialstainless steel  
     
    sealinghermetically sealed welded  
     
    Electrical connection2-pin connector (MIL-C-5015)  
     
    connection positionabove  
    notes
    [1]the upper cut-off frequency tolerance: ±10%  
     
    [2]typically  
     
    [3]zero-based balancing line, determined using the method of least squares  
     
    [4]no equivalent in SI units  
     
    [5]Conversion factor 1 g = 9.81 m/s²  
     
    [6]details: see PCBs Declaration of conformance PS023 and PS060  
    Supplied accessoriesör
    081A40mounting bolts with 1/4 "-28 thread-1 
     
    ICS-2single point calibration at 100 Hz (traceable to NIST)-1 
    (M) metric mounting
    equipment   
     
    M081A61metric mounting bolts with M6 thread-1 
    (TO) Temperature output
    temperature range36 …200 °F2 … 93 ° C 
     
    transcription factor5.56 mV / ° F
    (zero point at 32 °F)
    10 mV /. ° C 
     
    electrical connection3-Pin MIL-C-5015  
     
    pin assigNment (PIN A)acceleration output  
     
    Pin assigNment (PIN B)dimensions  
     
    pin assigNment (PIN C)temperature output  
     
    size - height1.86 in47.2 mm 
     
    mass2.0 oz56.7 grams 
    (EX) with ATEX approval
    approved for explosive atmosphere renCL I, div 2, groups A, B, C, D ExnL IIC T4, AExnA IIC T4  
     
    approval for use in potentially explosive atmospheresEEx nL IIC T4,-40 ° C≤Ta≤121 ° C, II 1 G  
     
    Approval for use in potentially explosive atmospheresCL I, div I, groups A, B, C, D CL II, div I, groups E, F, G Cl III, div I  
     
    approval for explosionsgefä endangered atmospheresExIA IIC T4, AExia IIC, T4  
     
    approval for use in potentially explosive atmospheresEEx nL IIC T4,-40 ° C≤Ta≤121 ° C, II 3 G  

    29 other articles of the same category: