PCB-(M)601A01

PCB-(M)601A01

  • Industrial ICP® vibration sensor,
  • Measurement range 50 g,
  • Sensitivity 100 mV/g,
  • Frequency range 0.27 … 10,000 Hz,
  • One-point calibration at 100 Hz,
  • 2-pin female connector above
  •  

    basic data
    sensitivity (±20%)10.2 mV/(m/s²)[5]
     
    measuring range±50 g±490 m /s² 
     
    Frequency range (± 3 dB)16 … 600,000 cpm0.27 … 10,000 Hz[3]
     
    resonance frequency960 kcpm16,000 Hz[4]
     
    Wide band resolution50 µg491 µm / s ²[4]
     
    linearity≤1% [1]
     
    Lateral acceleration sensitivity≤ 7%  
    Conditions of use
    Overload limit (shock)5,000 g pk49,050 m/s² pk 
     
    Temperature range-65 … 250 ° F-54 … 121 ° C 
     
    protection classIP68  
    technical characteristics
    Settling time (on bias voltage ± 1%)≤4.0 s  
     
    discharging charging time constant≥0.6 s  
     
    Power18 … 28 V DC  
     
    constant power supply2 … 20 mA  
     
    Output impedance< 150 Ω  
     
    Bias voltage8 … 12 V DC  
     
    Spectral noise (10 Hz)3.2 µg / √Hz31,0 (µm / s ²) / √Hz[4]
     
    spectral noise (100 Hz)1.0 µg / √Hz9.81 (µm / s ²) / √Hz[4]
     
    Spectral noise (1,000 Hz)0.7 µg / √Hz6.94 (µm / s ²) / √Hz[4]
     
    electrical insulation (housing)  
    Physical properties
    size - hex7/8 in22 mm 
     
    size - height1.94 in49.3 mm 
     
    Weight2.8 oz80 g 
     
    mounting thread1/4 "-28 threadedno equivalent[2]
     
    Assembly torque2 … 5 ft-lb2.7 … 6.8 Nm 
     
    sensor elementceramic  
     
    geometry of the Sensor elementshear principle  
     
    housing materialstainless steel  
     
    sealinghermetically sealed welded  
     
    Electrical connection2-pin connector (MIL-C-5015)  
     
    connection positionabove  
    notes
    [1]zero-based balancing line, determined using the method of least squares  
     
    [2]no equivalent in SI units  
     
    [3]the upper cut-off frequency tolerance: ±10%  
     
    [4]typically  
     
    [5]conversion factor = 1 g 9.81 m/s²  
     
    [6]details: see PCBs Declaration of conformance PS023  
    equipment
    081A40Mounting bolts with 1/4 "-28 thread-1" 
    (M) metric mounting
    equipment   
     
    M081A61metric mounting bolts with M6 threaded-1 
    (TO) temperature output
    temperature range36 … 2502 … 121 
     
    transcription factor5.56 mV / ° F
    (zero point at 32 °F)
    10 mV / ° C 
     
    Electrical connection3-Pin  
     
    pin assigNment (PIN A)acceleration output  
     
    Terminal assigNment (PIN B)ground  
     
    pin assigNment (PIN C)temperature output  

    29 other articles of the same category: