PCB-(M)621B51

PCB-(M)621B51

  • Industrial ICP®-miniature vibration sensor,
  • Measurement range 50 g,
  • Sensitivity 100 mV/g,
  • Frequency range 0.8 … 20,000 Hz,
  • Frequency response calibration,
  • 10-32 female connector on the side
  • basic data
    sensitivity (±5%)100 mV/g10.2 mV/(m/s²)[6]
    measuring range±50 g±490 m / s²
    Frequency range (±5%)144 … 600,000 cpm2.4 … 10,000 Hz[1]
    frequency range (± 10%)102 … 900,000 cpm1.7 … 15,000 Hz
    frequency range (± 3 dB)48 … 1.200,000 cpm0.8 … 20,000 Hz
    resonance frequency2,100 kcpm 35,000 Hz
    linearity≤1%[2]
    transverse acceleration sensitivity≤ 5%
    Conditions of use
    5,000 g pk49,050 m/s² pkOverload limit (shock)
    Temperature range-65 … 250 ° F-54 … 121 ° C
    technical characteristics
    settling time (on bias voltage ± 1%)≤ 5.0 s
    Mass1.06 oz30 g
    mounting thread10-32 female thread[4]
    Assembly torque10 … 20 in-lb1.13 … 2.26 Nm
    sensor elementceramic
    geometry of the sensor elementshear principle
    Housing materialstainless steel
    sealinghermetically sealed welded
    electric Port10-32-coaxial socket
    connection positionside
    notes
    [1]tolerance of the upper cutoff frequency: ±10%
    [2]zero-based balancing line, determined using the method of least squares
    [3]typical value
    [4]no equivalent in SI units
    [5]typically
    [6] Conversion factor 1 g = 9.81 m/s²
    Accessories
    ICS-1frequency response for uniaxial sensors from 10 Hz up to the upper 5% frequency-1
    (M) metric mounting
    Accessories supplied
    M081B05metric mounting bolts with M6 fine thread-1

    30 other articles of the same category: