PCB-1102-02A
PCB L&T Canister load cell, 100 lbf (445 N) rated capacity, 50% static overload protection, 2mV/V output, 1/4-28 UNF-2B threads, PT02E-10-6P connector, aluminum construction
- Measurement Range: 100 lb (445 N)
- Size - Diameter: 2.75 in (69.9 mm)
- Size - Height: 1.5 in (38.1 mm)
- Electrical Connector: PT02E-10-6P
Specification Notes
[1] FS - Full Scale.
[2] RO - Rated Output.
[3] Singularly applied, i.e. no other extraneous loads.
[4] Over compensated operating temperature range.
[5] Nominal.
[6] Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS.
[7] See Outline Drawing 51277 for Complete Dimensions
| English: | SI: | ||
|---|---|---|---|
| Performance | |||
| Measurement Range | 100 lb | 445 N | [1] |
| Sensitivity (±10 %) | 2 mV/V | 2 mV/V | [2] |
| Non-Linearity | ≤0.05 % FS | ≤0.05 % FS | |
| Hysteresis | ≤0.05 % FS | ≤0.05 % FS | |
| Non-Repeatability | ≤0.02 % FS | ≤0.02 % FS | |
| Creep (in 20 minutes) | ≤.025 % | ≤.025 % | |
| Static Error Band | ≤.05 % FS | ≤.05 % FS | |
| Eccentric Load Sensitivity | ≤.025 %/in | ≤.025 %/25.4mm | |
| Resonant Frequency | 3.8 kHz | 3.8 kHz | |
| Environmental | |||
| Overload Limit | 150 lb | 667 N | |
| Load Limit (Side Force, FX or FY) | 100 lb | 445 N | [3] |
| Load Limit (Bending Moment, MX or MY) | 100 in-lb | 11 Nm | [3] |
| Load Limit (Axial Torque, MZ) | 65 in-lb | 7 Nm | [3] |
| Temperature Range (Operating) | -65 to +200 °F | -54 to +93 °C | |
| Temperature Range (Compensated) | +70 to +170 °F | +21 to +77 °C | |
| Temperature Effect on Output (Maximum) | ±0.0015 %Reading/°F | ±0.0027 %Reading/°C | [4] |
| Temperature Effect on Zero Balance (Maximum) | ±0.0008 %FS/°F | ±0.0015 %FS/°C | [4] |
| Electrical | |||
| Bridge Resistance | 700 Ohm | 700 Ohm | [5] |
| Excitation Voltage (Recommended) | 10 VDC | 10 VDC | [6] |
| Insulation Resistance | >5000000000 Ohm | >5000000000 Ohm | |
| Zero Balance | ≤1 % FS | ≤1 % FS | |
| Output Polarity | +Tension | +Tension | |
| Physical | |||
| Size - Height | 1.5 in | 38.1 mm | [7] |
| Size - Diameter | 2.75 in | 69.9 mm | [7] |
| Weight | 0.67 lb | 304 g | |
| Mounting Thread | 1/4-28 Female | No Metric Equivalent | |
| Housing Material | Painted Aluminum | Painted Aluminum | |
| Sensing Element | Strain Gage | Strain Gage | |
| Deflection at Full Scale Capacity | 0.003 in | 0.08 mm | |
| Electrical Connector | PT02E-10-6P | PT02E-10-6P | |
* All specifications are at room temperature unless otherwise specified.
Accessories
| Optional | ||
| 181-012A | Mating conn., 6-socket (F) w/strain relief for sensors with PT conn. | 1 |
| 8311-01-10A | Cable assembly for sensors with PT conn., 10-ft, PT conn. to pigtails, 4-cond. cable | 1 |
PCB-1102-02A
