PCB-(M)643A12

PCB-(M)643A12

  • Vibration transmitter with power output according to
    the RMS value of vibration speed,
  • measuring range 0 … 50.8 mm / s RMS,
  • output range 4 … 20 mA,
  • frequency range 10 … 1,000 Hz,
  • free ausrichtbares integrated cable, length 3 m,
    ending on cut end
  •  

    basic data
    range0,0 … 2 in / s RMS0 … 50.8 mm / s RMS[1]
     
    Output area4 … 20 mA  
     
    frequency range (± 10%)600 … 60,000 cpm10 … 1,000 Hz[2] [3]
     
    Wide band resolution0.005 in / s RMS0.13 mm / s RMS[4]
     
    Linearity error≤1%  
    conditions of use
    temperature range-40 … 185 ° F-40 … 85 ° C 
    technical Properties
    power12 … 30 V DC  
     
    settling time (area within ±2% of full scale)  
     
    electrical insulation (housing)>100 MΩ  
    physical properties
    size - hex7/8 in22.2 mm  
    notes
    [1]conversion factor 1 in / sec = 0.0254 m/sec.  
     
    [2]1 Hz 60 = cpm ("Cycles Per Minute": rpm).  
     
    [3]frequencies below 5 Hz, the output signal fluctuates.  
     
    [4]typical value  
     
    [5]details: see PCB Declaration of Conformance PS039  
    equipment
    080A162mounting bolt ¾-16 on 1/4"-28-1 
     
    ICS-4" Frequency response cpm for uniaxial sensors from 0 (0 Hz) up to the upper 10% frequency of vibration transmitter-1 
    (RV) raw signal output - 100 mV/g (±20%)
    wiringIntegrated cable  
     
    connections (red wire)output signal 4 … 20 mA positive  
     
    (black wire) pin assigNment4 output … 20mA negative  
     
    pin assigNment (white wire)Raw signal positive  
     
    Pin assigNment (green wire)raw signal negative  
    (M) metric mounting
    equipment   
     
    M080A163mounting bolts M6 x ¾-16 1-1 

    30 other articles of the same category: