PCB-(M)642A10

PCB-(M)642A10

  • Vibration Transmitter with power output according to
    the peak value of vibration speed
  • Measuring range 0... 12.7 mm / s,
  • Output range 4... 20 mA,
  • Frequency range 3... 1,000 Hz,
  • Free ausrichtbares integrated cable, length 3 m,
    ending on cut end

basic data
range0,0... 0.5 in / s pk0... 25.4 mm / s pk[1]
output area4... 20 mA
frequency range (± 10%)180... 60,000 cpm3... 1,000 Hz[2] [3]
wide band resolution0.005 in / s RMS0.13 mm / s RMS[4]
Linearity≤1%
conditions of use
temperature range40... 185 ° F40... 85 ° C
specifications
power supply12... 30 V DC
settling time (area within ±2% of the final value)<15 s
electric Insulation (housing)≥ 100 MΩ
physical properties
size - hex < / td>7/8 in22.2 mm
Size - height1.41 in35.8 mm
Weight (without cable)3.8 oz108 grams
Mounting thread¾-16-Innengewinde
Installation torque3... 5 ft-lb4... 7 Nm
Sensor elementCeramic
Geometry of the sensor elementShear principle
Housing materialStainless steel
SealingHermetically sealed welded
Electrical connectionIntegrated cable
Cable outletOn the side
Cable terminationEnd cut off
Terminal assigNment (red wire)Output signal 4... 20 mA positive
Terminal assigNment (blue wire)Output signal 4... 20 mA negative
Cable length10 ft3.0 m
Cable typePolyurethane
Notes
[1]Conversion factor 1 in / sec = 0.0254 m/sec.
[2]1 Hz = cpm 60 ("Cycles Per Minute": revolutions per minute).
[3]At frequencies below 5 Hz, the output signal fluctuates.
[4]Typical value
[5]Details: see PCB Declaration of conformance PS039 and PS053
Included accessories
080A162Mounting bolt ¾-16 on 1/4"-28 < "-1
ICS-4Frequency response cpm for uniaxial sensors from 0 (0 Hz) up to the upper 10% frequency of vibration transmitter < /TD >-1
(EX) With ATEX approval
Approval for explosionsgefährdete atmospheresDIV II, CL I, GRPS A-D, ExnL, AExnA, IIC T4
Approved for use in potentially explosive atmospheresEEx ia IIC T4,-40 ° C?Ta?80 ° C, II 1 G
Approved for use in potentially explosive atmospheresEEx nL IIC T4,-40 ° C?Ta?80 ° C, II 3 G
Approved for use in potentially explosive atmospheresDIV I, CL I, II, III, GRPS A-G, ExIA, AExia, IIC T4
(RV) Raw signal output≥ 100 MΩ/g (±20 %)<)/ b >
Electrical connectionIntegrated cable
Terminal assigNment (red wire)Output signal 4... 20 mA positive
Terminal assigNment (black wire)Output signal 4... 20 mA negative
Terminal assigNment (white wire)Raw signal positive
Terminal assigNment (green wire)Raw signal negative
(M) metric mounting
Included accessories
M080A163Mounting bolts M6 x ¾-16 1-1

30 other articles of the same category: