PCB-(M)608A11/050BZ

PCB-(M)608A11/050BZ

  • Industrial ICP® vibration sensor,
  • Measurement range 50 g,
  • Sensitivity 100 mV/g,
  • Frequency range 0.5 … 10,000 Hz,
  • One-point calibration at 100 Hz,
  • Integrated cable, length 15 m,
    ending on cut end
  • basic data
    sensitivity (±15%)100 mV/g10.2 mV/(m/s²)[3]
    measuring range±50 g±490 m / s²
    Frequency range (± 3 dB)30 … 600,000 cpm0.5 … 10,000 Hz
    resonance frequency1,320 kcpm22,000 Hz[4]
    Wide band resolution350 µg3.434 µm / s ²[4]
    linearity≤1%[5]
    Lateral acceleration sensitivity≤ 7%
    Conditions of use
    Overload limit (shock)5,000 g pk49,050 m/s² pk
    Temperature range-65 … 250 ° F-54 … 121 ° C
    protection classIP68
    technical characteristics
    Settling time (on bias voltage ± 1%)≤ 2.0 s
    discharging charging time constant≥ 0.3 s
    Power18 … 28 V DC
    constant power supply2 … 20 mA
    Output impedance< 150 Ω
    Bias voltage8 … 12 V DC
    Spectral noise (10 Hz)8 µg / √ Hz78.5 (µm / s ²) / √ Hz[4]
    spectral noise (100 Hz)5 µg / √ Hz 49.1 (µm / s ²) / √ Hz[4]
    spectral noise (1,000 Hz)4 µg / √ Hz39.2 (µm / s ²) / √ Hz[4]
    electric Insulation (housing)≥ 100 MΩ
    physical properties
    size - Allen9/16 in14 mm
    size ße - height2.5 in64 mm
    weight (with cord)3.5 oz99.3 grams
    fixingmounting bolt
    Mounting thread1/4 "-28 threaded[1]
    Assembly torque2 … 5 ft-lb2.7 … 6.8 Nm
    sensor element" Ceramic
    geometry of the sensor elementshear principle
    housing materialstainless steel
    Sealingshed
    electrical connectionpotted integrated cable
    cable outlettop
    Cable length50 ft15.2 m
    cable typepolyurethane[2]
    notes
    [1]No equivalent in SI units
    [2]Screened two-wire cable with twisted wire
    [3]conversion factor 1 g = 9.81 m/s²
    [4]typically
    [5]zero-based balancing line, determined using the method of least squares
    [6]details: see PCBs Declaration of conformance PS023 and PS060
    Equipment
    081A40mounting bolts with 1/4 "-28 thread-1
    ICS-2single point calibration at 100 Hz (Rü" ckführbar on NIST)-1
    (M) metric mounting
    equipment
    M081A61metric mounting bolts with M6-thread-1
    (TO) temperature output
    temperature range36 … 250 ° F2 … 121 ° C
    transcription factor5.56 mV / ° F
    (zero point at 32 °F)
    10 mV / ° C
    Electrical connectionpotted integrated cable
    connections (red wire)acceleration output
    (Black wire) pin assigNmentmass
    pin assigNment (white wire)temperature output
    (EX) with ATEX approval
    Admission f &kitchen r hazardous atmospheresCL I, div 2, groups A, B, C, D
    ExnL IIC T4, AExnA IIC T4
    approval for use in potentially explosive atmospheresEEx nL IIC T4, 40 ° C ≤ Ta ≤ 121 ° C, II 3 G
    approval for use in potentially explosive atmospheresEEx nL IIC T4,-40 ° C ≤ Ta ≤ 121 ° C, II 1 G
    Approved for use in potentially explosive atmospheresCL I, div I, groups A, B, C, D CL
    II, div I, groups E, F, G Cl
    III, div I
    approval for hazardous AtmospheresExIA IIC T4, AExia IIC, T4
    (LB) low bias voltage
    Bias stress4.8 … 6.5 V DC
    Power12 … 28 V DC
    measuring range± 10 g±98 m / s ²

    4 other articles of the same category: