PCB-483C30
"
basic data | |||
number channels | 8 | ||
sensor type | ICP, voltage, charge | ||
increment of Gain | 0.1 | ||
accuracy (amplification factor 0, 1 x 0, 4 x) | ≤5% | ||
precision (Verstä rkungsfaktor 0, 5 x to 200x) | ≤1% | ||
(charge input at 100 Hz) sensitivity (±1%) | 0.1 … 10.0 mV / pC | ||
bottom Cutoff frequency (ICP® input) (-5%) | ≤0.05 Hz | ||
lower limiting frequency (charge receipt) (-5%) | 0.5 Hz | [3] [4] | |
top Cutoff frequency (amplification factor 0, 1 x to 9 x 99) (-3 dB) | > 100,000 Hz | ||
upper limit frequency (gain 100 x to 200x) (-3 dB) | > 80,000 Hz | ||
Filter type | low-pass of fourth order | ||
corner frequency of the electrical filter (-3 dB) | 10,000 Hz | [5] | |
Edge steepness of the filters | 24 dB/octave | ||
The passband of the filter frequency response accuracy | 0.01 | ||
phase shift (at 1,000 Hz) | ±2 ° | ||
linearity error | 0.01 | ||
crosstalk | < 72 dB | ||
TEDS reader function | Yes | ||
Bias voltage/error display | Open circuit/short circuit/overload | ||
digital interface | |||
digital interface | Ethernet | ||
Conditions of use | |||
temperature range (operation) | 32 … 120 ° F | 0 … 50 ° C | |
technical | |||
Power supply | power supply | ||
voltage (47 … 63 Hz) | 100 … 240 V AC | ||
Power | ? 0.85 A | ||
supply voltage (for sensor) | > 24 V DC | ||
Constant power supply (for ICP® sensors, not ground isolated) | 2 … 20 mA | [1] | |
constant power supply (for ICP® sensors, ground isolated) ( ±0. 6 mA) | 4 mA | ||
pk ±10 V | Overload threshold (±0. 5 V pk) | ||
DC Offset | < 50 mV | ||
Output range | 10 V | ||
carrying capacity of the Augangs | 50 mA | ||
output impedance | < 50Ω | ||
discharging charging time constant (charge input) (±25%) | 1 s | ||
wide band noise (amplification factor 1 x) (1 … 10,000 Hz) | 50 µV/rms | [2] | |
spectral noise (1 Hz) | 8 µV / √Hz | [2] | |
spectral noise (10 Hz) | 2 µV / √Hz | [2] | |
spectral noise (100 Hz) | 0.7 µV / √Hz | [2] | |
spectral noise (1,000 Hz) | 0.7 µV / √Hz | [2] | |
Spectral noise (10,000 Hz) | 0.6 µV / √Hz | [2] | |
wide band noise (amplification factor 10 x) (1 … 10,000,000 Hz) | 75 µV rms | [2] | |
spectral noise (1 Hz) | 18 µV / √Hz | [2] | |
spectral noise (10 Hz) | 1.5 µV / √Hz | [2] | |
Spectral noise (100 Hz) | 1.0 µV / √Hz | [2] | |
spectral noise (1,000 Hz) | 1.0 µV / √Hz | [2] | |
Spectral noise (10,000 Hz) | 1.0 µV / √Hz | [2] | |
wide band noise (gain 100 x) (1 … 10,000 Hz) | 350 µV rms | [] 2] | |
spectral noise (1 Hz) | 100 µV / √Hz | [2] | |
spectral noise (10 Hz) | 10 µV / √Hz | [2] | |
Spectral noise (100 Hz) | 6 µV / √Hz | [2] | |
spectral noise (1,000 Hz) | 5 µV / √Hz | [2] | |
SpectralNoise (10,000 Hz) | 5 µV / √Hz | [2] | |
wide band noise (0.1 mV / pC, amplification factor 1 x) (1 … 10,000 Hz) | 52.0 µV rms | [2] | |
Spectral noise (1 Hz) | 10.0 µV / √Hz | [2] | |
spectral noise (10 Hz) | 1.5 µV / √Hz | [2] | |
Spectral noise (100 Hz) | 0.6 µV / √Hz | [2] | |
spectral noise (1,000 Hz) | 0.6 µV / √Hz | [2] | |
spectral Noise (10,000 Hz) | 0.6 µV / √Hz | [2] | |
wide band noise (1.0 mV / pC, amplification factor 1 x) (1 … 10,000 Hz) | 52.0 µV rms | [2] | |
Spectral noise (1 Hz) | 14.0 µV / √Hz | [2] | |
spectral noise (10 Hz) | 2.0 µV / √Hz | [2] | |
Spectral noise (100 Hz) | 0.7 µV / √Hz | [2] | |
spectral noise (1,000 Hz) | 0.7 µV / √Hz | [2] | |
spectral Noise (10,000 Hz) | 0.7 µV / √Hz | [2] | |
wide band noise (10.0 mV / pC, amplification factor 1 x) (1 … 10,000 Hz) | 56.0 µV/rms | [2] | |
Spectral noise (1 Hz) | 15.0 µV / √Hz | [2] | |
spectral noise (10 Hz) | 2.0 µV / √Hz | [2] | |
Spectral noise (100 Hz) | 0.6 µV / √Hz | [2] | |
spectral noise (1,000 Hz) | 0.6 µV / √Hz | [2] | |
spectral Noise (10,000 Hz) | 0.6 µV / √Hz | [2] | |
electrical insulation (mass of different channels) | isolated / non isolated | ||
Electrical insulation (mass input and output side) | isolated / non-isolated | ||
Integrated oscillator circuit (ICP®) (±2%) | 0.1 V pk 100/1,000 Hz | ||
integrated oscillator circuit (load) (±2%) | 100 pC pk 100/1,000 Hz | ||
Input for external calibration signal: transcription factor (ICP®) (±1.%) | 1 V / V | ||
input for external calibration signal: transcription factor (load) (±1%) | 1,000 pC/V | ||
physical properties | |||
Electrical connection (sensor input) | BNC Jack | ||
electrical connection (output) | BNC Jack | ||
electric Connection (external calibration signal) | 10-32-coaxial socket | ||
electrical connection (Ethernet) | RJ45 | ||
size - height (nominal) | 1.75 in | 44.5 mm | |
Size - width (nominal) | 19 in | 482.6 mm | |
size - depth (nominal) | 13.7 in | 348 mm | |
Weight | 8 lb | 3.6 kg | |
notes | |||
[1] | configurable, default ex factory: 4 mA (±1. 0 mA). The channels can individually be configured. | ||
[2] | typically | ||
[3] | the lower cut-off frequency tolerance: ±25% | ||
[4] | with input impedance > 10 MOhm | ||
[5] | tolerance: ±5% | ||
[6] | details: see PCB Declaration of conformance PS024 | ||
equipment | |||
017AXX | cord | -1 | |
EE75 | Configuration software "MCSC" | -1 |