PCB-482C15

PCB-482C15

  • 4-channel power supply unit,
  • Inputs: ICP® and voltage,
  • Amplification factors 1 x, 10 x and 100 x,
  • BNC-inputs and outputs,
  • Including power supply
  • basic data
    number channels4
    sensor typeICP, voltage[2]
    Spannungsverstä strength (±1%) (at 500 Hz)1 x / 10 x / 100 x[2]
    (maximum) output range±10 V
    lower limiting frequency (-5%)0.05 Hz[1]
    Upper cut-off frequency (-3 dB)50,000 Hz
    Upper cut-off frequency (-5%)> 17,000 Hz
    phase shift (at 1,000 Hz)±1 °
    Ü youõre (maximum)-72 dB
    bias voltage/error (via LEDs) displayOpen circuit/short circuit/overload
    Conditions of use
    temperature range (operation)32 … 120 ° F0 … 50 ° C
    technical characteristics
    power supply (for supplied AC adaptor )AC
    mains voltage (47 … 63 Hz)100 … 240 V AC
    Power consumption (power supply unit)≤ 0.7 A
    power supply (sensor power supply unit)DC voltage
    Power supply (sensor power supply unit)32 … 38 V DC
    power consumption ( Sensor-Versorgungseinheit)< 0.25 A
    supply voltage (±1 V DC) (for sensor)26 V DC
    Constant power supply (for sensor)0 … 20 mA[3]
    ± 10/5 V pkOverload threshold (±1. 0 V pk)[2]
    DC Offset< 20 mV
    output impedance50 Ω
    wide band noise (1 … 10,000 Hz) (amplification factor 1 x)5.6 µV rms[4]
    spectral noise (1 Hz)0.67 µV / √ Hz[4]
    Spectral noise (10 Hz)0,10 µV / √ Hz[4]
    spectral noise (100 Hz)0.06 µV/ √ Hz[4]
    spectral noise (1,000 Hz)0.06 µV/. √ Hz[4]
    spectral noise (10,000 Hz)0.05 µV / √ Hz[4]
    wide band noise (1 … 10,000 Hz) (Verstä rkungsfaktor 10 x)21 µV/rms[4]
    spectral noise (1 Hz)5.10 µV / √ Hz[4]
    spectral noise (10 Hz) 0.60 µV / √ Hz[4]
    spectral noise (100 Hz)0.22 µV / √ Hz[4]
    spectral noise (1,000 Hz)0.22 µV / √ Hz[4]
    spectral noise (10,000 Hz)0.19 µV / √ Hz[4]
    wide band noise (1 … 10,000 Hz) (Verstä rkungsfaktor 100 x)165 µV/rms[4]
    spectral noise (1 Hz)57 µV / √ Hz[4]
    spectral noise (10 Hz) 5.2 µV / √ Hz[4]
    spectral noise (100 Hz)1.7 µV / √ Hz[4]
    spectral noise (1,000 Hz)1.8 µV / √ Hz[] 4]
    spectral noise (10,000 Hz)1.4 µV / √ Hz[4]
    physical properties
    electrical connection (ICP® sensor input) BNC-connector
    electrical connection (output)BNC Jack
    electrical connection (DC power supply)5-pin DIN female
    Size - height3.2 in8.1 cm
    size - width8.0 in20 cm
    Size - deep5.9 in15 cm
    Size1.25 lb567 grams
    notes
    [1]the lower cut-off frequency tolerance: ±25%
    [2]Adjustable via internal jumper
    [3]configurable, default setting at the factory: 4 mA (±0. 5 mA). The channels of k & wl; can be individually configured.
    [4]typically
    [5]details: see PCB Declaration of Conformance PS024
    equipment
    017AXXcord-1
    488 B 04/NCpower supply-1

    7 other articles of the same category: