PCB-HT356A63

PCB-HT356A63

  • Triaxial ICP® high-temperature vibration sensor,
  • Continuous use temperature up to 163 ° C,
  • With built-in low-pass filter,
  • Measuring range 500 g
  • Sensitivity 10 mV / g,
  • Frequency range 2 … 4,000 Hz,
  • 4-pin female connector on the side
  • basic data
    sensitivity (±15%)10 mV / g1.02 mV/(m/s²)
    range±500 g pk ±4. 905 m/s 2 pk
    frequency range (-5%)2 … 4,000 Hz
    Resonance frequency≥ 55,000 Hz
    Edge steepness of the filter6 dB/octave[1]
    electric filter corner frequency15,000 Hz[1]
    Wide band resolution0.008 g RMS0.08 m/s² RMS[1]
    Linearity error≤ 1%[3]
    transverse acceleration sensitivity≤ 5%
    conditions
    Overload limit (Shock)±10. 000 g pk ±98.100 m/s² pk
    Temperature range (Operation)-65 … 325 ° F-54 … 163 ° C[2]
    specifications
    power supply18 … 30 V DC
    Constant power supply2 … 20 mA
    output impedance≤200Ω
    Bias voltage7 … 11 V DC
    Discharging charging time constant0.3 … 1,0 s
    settlingbr(auf Bias-Spannung ±10 %)< 3 s
    Spectral noise (1 Hz)445 µg / √ Hz4,365 (µm / s ²) / √ Hz[1]
    spectral noise (10 Hz)135 µg / √ Hz1,325 (µm / s ²) / √ Hz[1]
    spectral noise (100 Hz)90 µg / √ Hz883 (µm / s ²) / √ Hz[1]
    spectral noise (1,000 Hz)80 µg /. √ Hz785 (µm / s ²) / √ Hz[1]
    physical properties
    Sensorelementceramic
    geometry of the sensor elementshear principle
    housing materialtitanium
    Sealinghermetically sealed
    size - height0.40 in10.2 mm
    size - length0.77 in19.6 mm
    size - width0.40 in10.2 mm
    mass0.19 oz5.3 grams[1]
    Wiring1/4 "-28 4-pin
    connection positionside
    mounting thread5-40" female
    Assembly torque4 … 5 in-lb45 … 56 NCM
    notes
    [1]typically
    [2]the data for temperatures above 121 ° C applies only for transducers with HT option.
    [3]zero-based balancing line, determined using the method of least squares
    [4]details: see PCBs Declaration of conformance PS023
    equipment
    080A Adhesive mounting-1
    081A27mounting bolts, 5-40 on 5-40-1
    081A90mounting bolts, 10-32 on 5-40-1
    ACS-1Tfrequency response for Triaxial accelerometer, traceable to NIST, 10 Hz up to the upper 5% frequency-1
    M081A27metric mounting bolts, 5-40 M3 x 0.50-1
    Additional information
    Featuresbuilt-in low-pass filter with low cut-off frequency
  • weight
  • 22 other articles of the same category: