PCB-3713B1210G
| basic data | |||
| sensitivity (±5%) | 200 mV / g | 20.4 mV/(m/s²) | [1] |
| range | ±10 g PK | ±98, 1 m/s 2 pk | |
| frequency range (±5%) | 0 … 1,000 Hz | ||
| Frequency range (± 10%) | 0 … 1500 Hz | ||
| resonance frequency | ≥ 2.000 Hz | ||
| phase response (100 Hz) | < 10 ° | ||
| wide band resolution | 1.2 mg rms | 0,012 m/s² RMS | [2] |
| linearity error | ≤ 1% | [3] | |
| transverse acceleration sensitivity | ≤ 3% | ||
| conditions | |||
| Overload limit (shock) | ±3. 000 g pk | ±29. 420 m/s² pk | |
| temperature range (operation) | -65 … 250 ° F | -54 …121 ° C | |
| temperature range (storage) | -65 … 250 ° F | -54 … 121 ° C | |
| Temperature coefficient of sensitivity | ≤3% | [4] | |
| Temperature coefficient of sensitivity the zero point | ±2% FSO | [4] [5] | |
| strain sensitivity (base area) | 0.0001 g/µε | 0.001 (m/s²)/µε | [2] |
| magnetic sensitivity | 10.5 | µg/GS/1.03 (m/s²) / T | [2] |
| technical characteristics | |||
| Supply | 6 … 30 V DC | ||
| power | &le≤6 mA | ||
| Output impedance | ≤ 100 Ω | ||
| Spannungsoffset | ± 40 mV DC | [6] | |
| spectral noise (1) | 107.9 µg /. √ Hz | 1,058 (µm / s ²) / √ Hz | [2] |
| electrical insulation (housing) | ≥ 100 MΩ | ||
| physical properties | |||
| Housing material | Titanium | ||
| Sealed | sealedclose | ||
| size - length | 0.8 in | 20.3 mm | |
| size - width | 0.8 in | 20.3 mm | |
| Size - height | 0.8 in | 20.3 mm | |
| dimensions (with cable) | 4.2 oz | 119 grams | |
| wiring | Integrated cable | ||
| cable exit | side | ||
| cord type | type 037, 10-conductor shielded cable | ||
| Cable length | 10 ft | 3 m | |
| notes | |||
| [1] | measured at 100 Hz, 1 g RMS | ||
| [2] | typically | ||
| [3] | zero-based balancing line, determined using the method of least squares | ||
| [4] | -54 … 121 ° C, reference 24 ° C | ||
| [5] | FSO = "Full Scale Output": maximum output signal of the measuring range (4 V DC) ). | ||
| [6] | offset at 3 meters cable length (type 037) | ||
| [7] | details: see PCB Declaration of Conformance PS027 | ||
| Equipment | |||
| 080A12 | adhesive mounting | -1 | |
| 081 B 05 | Mounting bolts (10-32 on 10-32) | -1 | |
| ACS-85T | calibration of amplitude and phase response for Triaxial sensor | -1 | |
| M081B05 | Mounting bolts 10-32 to M6 x 0.75 | -1 |
PCB-3713B1210G
