PCB-HT(M)354C10/NC

PCB-HT(M)354C10/NC

  • Triaxial ICP® high-temperature vibration sensor,
  • Continuous use temperature up to 163 ° C,
  • With through hole,
  • Masseisoliert,
  • Measuring range 500 g
  • Sensitivity 10 mV / g,
  • Frequency range 2 … 8,000 Hz,
  • Mass 5 grams,
  • Integrated connection cable, length 1.5 m,
    ending on 4-pin female connector,
  • without extension cable
  • "
    basic data
    sensitivity (±15%)10 mV / g1.02 mV/(m/s²)
    range±500 g pk ±4. 905 m/s 2 pk
    frequency range (±5%)2 … 8,000 Hz
    Resonance frequency≥ 40,000 Hz
    Wide band resolution0.003 g RMS0.03 m/s² RMS[1]
    Linearity error≤ 1%[2]
    transverse acceleration sensitivity≤ 5%
    conditions
    (shock) overload limit± 10.000 g PK ±98.100 m/s² pk
    Temperature range-65 … 325 ° F-54 … 163 ° C
    specifications
    power supply18 … 30 V DC
    Constant power supply2 … 20 mA
    output impedance≤200Ω
    Bias voltage7 … 11 V DC
    Discharging charging time constant0.3 … 1,0 s
    settlingbr(auf Bias-Spannung ±10 %)< 3 s
    Spectral noise (1 Hz)1,000 µg / √ Hz9.810 (µm / s ²) / √ Hz[1]
    spectral noise (10 Hz)300 µg / √ Hz2.943 ( µm / s ²) / √ Hz[1]
    spectral noise (100 Hz)80 µg / √ Hz785 (µm / s ²) / √ Hz[1]
    spectral noise ( 1,000 Hz)25 µg / √ Hz308 (µm / s ²) / √ Hz[1]
    electrical insulation≥ 100 MΩ
    physical properties
    Sensor elementceramic
    geometry of the sensor elementshear principle
    Housing materialtitanium
    sealinghermetically sealed
    size - H öhe0.30 in7.6 mm
    size - length0.55 in14.0 mm
    size - width0.55 in14.0 mm
    Dimensions (without cable)0.18 oz5.0 grams[1]
    wiring1/4 "-28 4-pin
    Cable outletOn the side
    Cable length5 ft1.5 m
    cord typetype 034, 4-wire shielded cable
    Fixinghole
    notes
    [1]typically
    [2]zero-based balancing line, determined with the Method of least squares
    [3]details: see PCBs Declaration of conformance PS023
    equipment
    039A21Allen wrench 3/32 "hex-1
    081 B 93insulated mounting screw, 5-40 thread x 12.7 mm long (for model 354 C 10)-1
    ACS-1Tfrequency response for Triaxial accelerometer, traceable to NIST, 10 Hz up to the upper 5% frequency-1
    (M) metric mounting
    Accessories
    M039A22Allen wrench for use with thread M3-1
    M081B93metric mounting screw-1
    Additional information
    featuresEarth free mounting with round screw
  • weight
  • 22 other articles of the same category: