PCB-(M)320C53

PCB-(M)320C53

  • ICP® high-temperature vibration sensor,
  • Continuous use temperature up to 163 ° C,
  • Measuring range 5,000 g,
  • Sensitivity 1 mV / g,
  • Frequency range 1... 5,000 Hz,
  • Mass 1.9 grams,
  • 5-44 connector on the side

specifications
basic dataEnglish unitsSI units 
Sensitivity (± 20%)1 mV / g0.102 mV / (m / s)
measuring range± 5,000 g pk± 49 050 m / s pk
Frequency range (± 5%)1 ... 5000 Hz
Frequency range (± 10%)0.6 ... 10,000 Hz[4]
Frequency range (± 3 dB)0.3 ... 20,000 Hz[4]
integrated filterFirst order low pass
Corner frequency of the electric filter≥20.000 Hz
resonant frequency≥50.000 Hz
Broadband resolution (1 ... 10,000 Hz)0.04 g RMS0.39 m / s RMS[3]
linearity error≤1%[1]
Lateral acceleration sensitivity≤5%[2]
Operating conditions
Overload limit (shock)± 10,000 g pk± 98,100 m / s² pk
The temperature range (operation)-100 ... 325 ° F-73 ... 163 ° C
Temperature coefficient of sensitivity≤0,005% / ° F≤0,009% / ° C
Strain sensitivity (base surface)≤0,2 g / µε≤2 (m / s²) / µε[3]
Technical characteristics
supply voltage19 ... 30 V DC
Constant current supply2 ... 20 mA
output impedance≤200 Ω
Bias voltage8 ... 12 V DC
discharging0.4 ... 2.2 s
Settling time 
(on the bias voltage ± 10%)
≤10 s
Spectral Noise (1 Hz)7,500 µg/√Hz73,500 (µm/s²)/√Hz[3]
Spectral noise (10 Hz)1500 mcg / µε14,700 (µm/s²)/√Hz[3]
Spectral noise (100 Hz)500 µg/√Hz4,905 (µm/s²)/√Hz[3]
Spectral noise (1,000 Hz)250 ug / √Hz2,450 (µm/s²)/√Hz[3]
Electrical insulation (base)≥100MΩ[5] [4]
physical properties
Size - Height0.23 in5.84 mm
Dimensions0.065 oz1.85 grams[3]
sensor elementUHT-12 ™
Geometry of the sensor elementshear principle
housing materialtitanium
sealhermetically sealed
Size - Length0.65 in16.4 mm
Size - Width0.38 in9.6 mm
electrical connection5-44-coaxial
port locationLaterally
attachmentThrough Hole
Hints
[1]Zero-based line of best fit, determined by the method of least squares
[2]Lateral acceleration sensitivity typically ≤3%
[3]typically,
[4]and 3 dB range typically around 2,000 Hz - When using the insulating washer, the upper frequency limit of the 10% reduced.
[5]When using the insulating washer
[6]Details: see PCB Declaration of Conformance PS023
included supply
039A20Allen wrench, 5/64 "hex(1)
081B36Isolated mounting screw, 2-56 thread x 3/8 "long (for the model 357B06)(1)
ACS-1Frequency response, traceable to NIST (10 Hz up to the top 5% point)(1)
available options
(M) Metric assembly
included supply
M039A20Allen wrench, 1.5mm hex(1)
M081B36Metric mounting screw(1)

12 other articles of the same category: