PCB-357B04
basic data | |||
sensitivity (±15%) | 10 pC/g | 1.02 pC/(m/s²) | |
range | ±2. 000 g PK | ±19. 600 m/s² pk | |
frequency range (+ 5%) | 9,000 Hz | [3] | |
Frequency range (+ 10%) | 12,000 Hz | [3] | |
frequency range (+ 3 dB) | 18,000 Hz | [3] | |
resonance frequency | ≥38,000 Hz | ||
Linearity | ≤1% | [1] | |
transverse acceleration sensitivity | ≤5% | ||
Conditions of use | |||
Overload limit (shock) | ±21. 000 g pk | ±206. 010 m/s² pk | |
Temperature | -95 … 500 ° F | -71 … 260 ° C | |
strain sensitivity (footprint) | 0.0002 g/µε | 0.002 (m/s²)/µε | [2] |
Technical properties | |||
capacity | 930 pF | [2] | |
Insulation resistance (at 21 ° C) | ≥1,000,000 MΩ | ||
insulation resistance (at 260 ° C) | ≥100 MΩ | [2] | |
Output polarity | negative | ||
physical properties | |||
sensor element | ceramic | ||
geometry of the Sensor element | shear principle | ||
housing material | titanium | ||
sealing | hermetic | ||
Size - hex | ½ in | 12.7 mm | |
size - height | 1.19 in | 30.2 mm | |
mass | 0.39 oz | 11 grams | [2] |
electrical connection | 10-32-coaxial socket | ||
connection position | above | ||
Mounting thread | 10-32 female thread | ||
notes | |||
[1] | zero-based balancing line,.determined with the method of least squares | ||
[2] | typically | ||
[3] | the lower cut-off frequency is determined by the used Signal conditioning electronics from. | ||
Equipment | |||
080A109 | mounting wax | -1 | |
081 B 05 | Mounting bolts (10-32 on 10-32) | -1 | |
ACS-1 | frequency response, traceable to NIST (10 Hz up to the upper 5% point) | -1 | |
M081B05 | Mounting bolts 10-32 to M6 x 0.75 | -1 | |
(J) mass insulation of | |||
frequency range (5%) | 7,000 Hz | ||
frequency range (10%) | 8,000 Hz | ||
Resonance frequency | ≥30,000 Hz | ||
Electrical insulation (base) | >100 MΩ | ||
size - hex | 0.5 in | 12.7 mm | |
-Height | 1.24 in | 31.5 mm | |
(P) positive output voltage | |||
(W) waterproof cable connection | |||
electrical Port | sealed integrated cable | ||
connection position | above |