PCB-113B31
    zoom_out_map

      PCB-113B31

    • ICP® high frequency pressure sensor with INVAR-membrane /-housing,
    • Especially insensitive to temperature transients,
    • Beschleunigungskompensiert,
    • Measuring range 1.379 kPa,
    • Sensitivity 3.6 mV / kPa,
    • Lower limiting frequency 5.0 Hz,
    • 10-32 female connector
    •  

      basic data
      (±5 V output range) measuring range1,379 kPa 
       
      usable range (output range ±10 V)400 psi2,760 kPa[1]
       
      sensitivity (±15%)/25 mV / psi3.6 mV / kPa 
       
      maximum pressure1,000 psi6.895 kPa 
       
      Resolution1 mpsi0.007 kPa 
       
      resonance frequency≥400,000 Hz  
       
      rise time (reflected pressure)≤ 1.5 µs  
       
      lower limiting frequency5.0 Hz  
       
      linearity≤1.0% FS [2]
      Conditions of use
      Acceleration sensitivity≤ 0.002 psi/g≤ 0,0014 kPa/(m/s²) 
       
      Temperature range (operation)-100 … 275 ° F-73 … 135 ° C 
       
      Temperature coefficient of sensitivity≤ 0,1 %/°F≤0.18% / ° C 
       
      maximum shock (for fraction of a second)3,000 ° F1,650 ° C 
       
      Maximum acceleration2,000 g pk19.614 m/s² pk 
       
      Maximum shock resistance20,000 g pk196.140 m/s² pk 
      technical Properties
      output polarity (positive pressure)positive  
       
      discharging charging time constant (at room temperature)0.1 … 1,0 s  
       
      Supply20 … 30 V DC  
       
      constant power supply2 … 20 mA  
       
      Output impedance< 100Ω  
       
      Bias voltage8 … 14 V DC  
      Physical properties
      Geometry of the sensor elementcompression principle  
       
      Sensor elementquartz  
       
      Housing materialINVAR  
       
      membraneINVAR  
       
      sealinghermetically sealed welded  
       
      Electrical connection10-32-coaxial socket  
       
      mass0.2 oz6.0 grams 
      notes
      [1]up to 10 V must be at least 24 V DC. At low bias voltage of the sensor, no negative output range is usable up to-10 V.  
       
      [2]zero-based balancing line, determined using the method of least squares  
       
      [3]details: see PCBs Declaration of conformance PS023  
      equipment
      060A03installation sleeve, 5/16-24-2A thread, 1/4 "hex, (stainless steel)-1 
       
      060A05Installation sleeve, M7 x 0.75-6 g-thread-1 
       
      065A02sealing ring for flush mounting, 0,248 "outside x 0.219" x 0.015 "tall, brass3 
       
      PCB-113B31

      Specific References

      Download

      113B31_drawing.PDF

      Technical drawing

      Download (173.22k)

      113B31_manual.PDF

      Operating instructions

      Download (303.11k)

      113B31_specs.PDF

      Technical data sheet

      Download (31.29k)