PCB-113B26

PCB-113B26

  • ICP® high frequency pressure sensor with INVAR-membrane,
  • Beschleunigungskompensiert,
  • Measuring range 3.450 kPa,
  • Sensitivity 1.45 mV / kPa,
  • Lower limiting frequency 0.01 Hz,
  • 10-32 female connector

basic data
Measurement range (output range ± 5 V)500 psi3,450 kPa
Usable overload range (output range is ± 10 V)1,000 psi6895 kPa[1]
Sensitivity (± 10%)10 mV / psi1.45 mV / kPa
maximum pressure10,000 psi68,950 kPa
resolution2 mpsi0.014 kPa[2]
resonant frequency≥500.000 Hz
rise time≤1,0 microseconds
Lower limit frequency (-5%)0.01 Hz
linearity error≤1,0% FS[3]
Operating conditions
acceleration sensitivity≤0,002 psi / g≤0,0014 kPa / (m / s)
The temperature range (operation)-100 ... 275 ° F-73 ... 135 ° C
Temperature coefficient of sensitivity≤0,03% / ° F≤0,054% / ° C[2]
Maximum temperature shock (for split second)3000 ° F1649 ° C
maximum acceleration2000 g pk19,614 m / spk
Maximum shock resistance20,000 g pk196,140 m / s pk
Technical characteristics
Output polarity (positive pressure)positive
Discharging time (at room temperature)?50 s
supply voltage20 ... 30 V DC
Constant current supply2 ... 20 mA
output impedance<100 Ω
Bias voltage8 ... 14 V DC
physical properties
Geometry of the sensor elementcompression principle
sensor elementquartz
housing material17-4 (stainless steel)
membraneInvar
sealHermetically sealed
electrical connection10-32 coaxial
Mass (with mounting sleeve)0.20 oz6.0 grams
Hints
[1]For an output range up to 10 V, the supply voltage at least 24 V has to DC , respectively. At low bias voltage of the sensor, no negative output range up to -10 V can be used.
[2]typically,
[3]Zero-based line of best fit, determined by the method of least squares
[4]Details: see PCB Declaration of Conformance PS023
included supply
060A03Mounting sleeve, 5 / 16-24-2A threads, 1/4 "hex, (stainless steel)-1
060A05Mounting sleeve, M7 x 0,75-6g thread-1
065A02Sealing ring for flush mounting, 0.248 "outside x 0.219" x 0.015 inner "high, brass-3
065A05Distance-sealing ring, 0.248 "outside x 0.221" x 0.240 inwardly "tall, 17-4 (stainless steel)-1
(E) coating Emralon
coatingEmralon
electrical insulation100 M
included supply
065A08Isolation ring, 0.250 "outside x 0.218" x 0.027 inner "high, anodized aluminum-3
065A22Seal, 0.250 "outside x 0.218" x 0.015 inwardly "Torlon or Vespel-3
(S) stainless steel diaphragm
(W) Waterproof cable connection
included supply
060A03Mounting sleeve, 5 / 16-24-2A threads, 1/4 "hex, (stainless steel)-1
(WM) watertight cable connection
included supply
060A05Mounting sleeve, M7 x 0,75-6g thread-1

7 other articles of the same category: