PCB-113B24

PCB-113B24

  • ICP® high frequency pressure sensor with INVAR-membrane,
  • beschleunigungskompensiert,
  • Measuring range 6.895 kPa,
  • Sensitivity 0,725 mV / kPa,
  • Lower limiting frequency 0.005 Hz,
  • 10-32 female connector
  • of
    basic data
    measuring range (±5 V output range)1,000 psi6.895 kPa
    usable range (output range ±10 V)2,000 psi13.790 kPa[2]
    sensitivity (±10%)/5.0 mV / psi0,725 mV / kPa
    maximum pressure10,000 psi68.950 kPa
    Resolution5 mpsi0.035 kPa[1]
    resonance frequency≥ 500, 000 Hz
    rise time≤ 1.0 µs
    Lower limiting frequency (-5%)0.005 Hz
    linearity≤ 1.0% FS[3]
    Conditions of use
    acceleration sensitivity≤ 0.002 psi/g≤ 0,0014 kPa/(m/s²)
    temperature range (operation)-100 … 275 ° F-73 … 135 ° C
    Temperature coefficient of sensitivity≤ 0.03 %/°F≤ 0,054 %/°C[1]
    maximum shock (for Fraction of a second)3,000 ° F1.649 ° C
    maximum acceleration2,000 g pk19.614 m / PK
    Maximum shock resistance20,000 g pk196.140 m/s² pk
    Technical characteristics
    Output polarity (positive pressure)positive
    Discharging charging time constant (at room temperature)≥ 100 s
    supply20 … 30 V DC
    Constant power supply2 … 20 mA
    output impedance< 100 Ω
    Bias voltage8 … 14 V DC
    physical properties
    geometry of the sensor elementcompression principle
    Sensor elementquartz
    goäusematerial17-4 (Stainless steel)
    membraneINVAR
    sealinghermetically sealed welded
    Electrical connection10-32-coaxial socket
    dimensions (with mounting sleeve)0.21 oz6.0 grams
    notes
    [1]typically
    [2]for output range up to 10 V the supply voltage must be at least 24 V DC amount. At low bias voltage of the sensor, no negative output range is usable up to-10 V.
    [3]zero-based balancing line, determined using the method of least squares
    [4]details: see PCBs Declaration of conformance PS023
    equipment
    060A03installation sleeve, 5/16-24-2A thread, 1/4 "hex, (stainless steel)-1
    060A05Installation sleeve, M7 x 0,75-6 g-thread-1
    065A02sealing ring for flush mounting, 0,248 "outside x 0.219" x 0.015 "high brass3
    065A05gasket spacer, 0,248" outside x 0,221 "x 0.240" high, 17-4 (Stainless steel)-1
    (S) Emralon coating
    coatingEmralon
    electrical insulation≥ 100 MΩ
    Equipment
    065A08insulation ring, 0.250 "outside x 0,218" x 0.027 "high, anodized aluminium3
    065A22seal, 0.250 "x outside 0,218" x 0.015 "high, Torlon or Vespel3
    (S) stainless steel diaphragm
    (W) waterproof cable connection
    Accessories
    060A03installation sleeve, 5/16-24-2A thread, 1/4 "hex, (stainless steel)-1
    (WM) waterproof cable connection
    equipment
    060A05installation sleeve, M7 x 0.75-6 g-thread-1

    7 other articles of the same category: