PCB-113B23

PCB-113B23

  • ICP® high frequency pressure sensor with INVAR-membrane,
  • Beschleunigungskompensiert,
  • Measuring range 68.950 kPa,
  • Sensitivity 0.073 mV / kPa,
  • Lower limiting frequency 0.0005 Hz,
  • 10-32 female connector
  • of
    basic data
    measuring range (±5 V output range)10,000 psikPa 68.950
    sensitivity (±0, 03 mV / psi)0.5 mV / psi0.073 mV /. kPa
    maximum pressure15,000 psikPa 103.420
    resolution40 mpsi0.28 kPa[1]
    Resonance frequency≥ 500, 000 Hz
    rise time≤ 1.0 µs
    lower limiting frequency (-5%)0.0005 Hz
    Linearity≤ 1.0% FS[2]
    conditions
    acceleration sensitivity≤ 0.002 psi/g≤ 0.0014 kPa / ( m/s 2)
    temperature range (operation)-100 … 275 ° F-73 … 135 ° C
    Temperature coefficient of sensitivity≤ 0.03 %/°F≤ 0,054 %/°C[1]
    maximum shock (for fraction of a second)3,000 ° F1.649 ° C
    maximum Acceleration2.000 g PK19.614 m/s² pk
    Maximum shock resistance20,000 g pk196.140 m/s² pk
    Technical characteristics
    Output polarity (positive pressure)positive
    Discharging charging time constant (at room temperature)≥ 1,000 s
    supply20 … 30 V DC
    Constant power supply2 … 20 mA
    output impedance< 100 Ω
    Bias voltage8 … 14 V DC
    Physical properties
    geometry of the sensor elementcompression principle
    sensor elementquartz
    Housing material17-4 (Stainless steel)
    membraneINVAR
    Sealinghermetically sealed welded
    Electrical connection10-32-coaxial socket
    weight0.21 oz6.0 grams
    notes
    [1] Typically
    [2]zero-based balancing line, determined using the method of least squares
    [3]details: see PCB Declaration of conformance PS023
    equipment
    060A03installation sleeve, 5/16-24-2A thread, 1/4 "hex, (stainless steel)-1
    060A05installation sleeve, M7 x 0.75-6 g-thread-1
    065A02sealing ring for flush mounting, 0,248 "outside x 0.219" x 0.015 "high,. Brass3
    065A05gasket spacer, 0,248 "outside x 0,221" x 0.240 "high, 17-4 (Stainless steel)-1
    (S) Emralon coating
    CoatingEmralon
    electrical insulation≥ 100 MΩ
    Equipment
    065A08insulation ring, 0.250 "outside x 0,218" x 0.027 "high, anodized aluminium3
    065A22seal, 0.250 "x outside 0,218" x 0.015 "high, Torlon or Vespel3
    (S) stainless steel diaphragm
    (W) waterproof cable connection
    Accessories
    060A03installation sleeve, 5/16-24-2A thread, 1/4 "hex, ( Stainless steel)-1
    (WM) waterproof cable connection
    equipment
    060A05installation sleeve, M7 x. 0.75-6 g-thread-1

    7 other articles of the same category: