PCB-132B38

PCB-132B38

  • Miniature-ICP® pressure sensor
  • Measuring range 345 kPa
  • Sensitivity 20.3 mV / kPa
  • Frequency range 11... 1,000 kHz
  • Integrated cable, length 3 m,
    ending on open ends


Specifications
Basic dataEnglish unitsSI units 
Measuring range50 psi345 kPa 
Sensitivity (± 30 %)140 mV / psi20.3 mV / kPa 
Maximum dynamic pressure800 psi5.516 kPa 
Resolution0.001 psi0,007 kPa[2]
Rise time (incident pressure)≤3 µs[1]
Rise time (reflected pressure)≤1 µs 
Lower cut-off frequency (-5%)11,000 Hz 
Upper frequency limit1 MHz[3] [2]
Conditions of use
Temperature range (operation)-13... 175 ° F-25... 79 ° C 
Technical properties
Output polarity (positive pressure)Positive 
Discharge charge time constant
(in the case of Kittemperature)
≤0,000045 s
Supply voltage20... 30 V DC 
Constant power supply2... 20 mA 
Output impedance≤100Ω 
Bias voltage8... 14 V DC 
Physical properties
Sensor elementCeramic 
Housing materialStainless steel 
SealingEpoxy resin 
Mass0.45 oz12.8 gm[5]
Cable terminationTinned ends 
Cable typeType 030, coaxial cable 
Notes
[1]Rise time in air at Mach 1  
[2]Typically  
[3]The cut-off frequency can be reduced by the amount of constant current and the length of the cable output used.  
[4]Calculated  
[5]Typically; with cable  
[6]Details: See PCBs Declaration of conformance PS023  
Included accessories
070B 09Solder adapter(1)

7 other articles of the same category: