PCB-483C41
basic data | |||
number channels | 8 | ||
sensor type | ICP, voltage, charge | ||
Verstä rkungsfaktor (ICP®-/ voltage input) | 0, 1 x to 200x | ||
gain (charge input) (mV/pC) | 0.01 … 2.000 | ||
Increment of the gain setting (ICP®-/ voltage input) | 0.1 | ||
Step width of the gain setting (charge input) (mV/pC) | 0.01 | ||
precision (ICP®-/ voltage input) (amplification factor 0, 01 x … 0, 04 x) ) | ≤5% | ||
precision (ICP®-/ voltage input) (amplification factor 0, 05 x … 200x) | ≤1% | ||
accuracy ( Charge input) (amplification factor 0.01 … 0.04 mV / pC) | ±6% | ||
accuracy (charge input) (amplification factor of 0.05 … 2.000 mV / pC) | ≤1% | ||
Entrance (load input) | 100,000 pC pk | ||
Input range (ICP®-/ voltage input) | 10 V pk | [6] | |
input range (ICP®-/ voltage input, minimal) | 5 V pk | ||
bottom Cutoff frequency (ICP®-/ voltage input) (-5%) | ≤0.05 Hz | ||
lower limiting frequency (charge receipt) (-5%) | 0.5 Hz | [3] | |
top Cutoff frequency (amplification factor 0.01 … 99.9) (-3 dB) | > 100,000 Hz | ||
upper frequency limit (gain 100 … 2,000) (-3 dB) | > 80,000 Hz | ||
Filter type | Butterworth low-pass of eighth order | ||
corner frequency of the electrical filter (-10%) | 0.1/0.3/1/3/10/30000 Hz | [5] | |
Edge steepness of the filter | 160 dB/decade | ||
The passband of the filter frequency response accuracy | 0.01 | ||
Phase shift (at 1,000 Hz) | ±2 ° | ||
linearity error | 0.01 | ||
crosstalk | ? 72 dB | ||
TEDS reader function | Yes | ||
bias voltage/error (via LEDs) display | Open circuit/short circuit/overload | ||
Manual | |||
user | keypad | ||
digital display | 2 lines, 16 characters | ||
digital interface | |||
Digital interface | Ethernet | ||
conditions of use | |||
temperature range (operation) | 32 … 120 ° F | 0 … 50 ° C | |
Technical properties | |||
Power supply | voltage | ||
Voltage (47 … 63 Hz) | 100 … 240 V AC | ||
power | ≤0.7 A | [5] | |
Supply voltage (for sensor) | > 24 V DC | ||
constant power supply (for sensor) | 2 … 20 mA | [1] | |
10 V pk | Overload threshold (±0. 5 V pk) | ||
DC Offset | < 50 mV | ||
output range (minimum) | 10 V | ||
capacity of the output (minimal) | 10 mA | ||
output impedance | < 50Ω | ||
wide band noise (amplification factor 1 x) (1 … 10,000 Hz) | 50 µ V/rms | [2] | |
spectral noise (1 Hz) | 8 µV / √Hz | [2] | |
spectral noise (10 Hz) | 2 µV / √Hz | [2] | |
Spectral noise (100 Hz) | 0.7 µV / √Hz | [2] | |
spectral noise (1,000 Hz) | 0.7 µV / √Hz | [2] | |
Spectral noise (10,000 Hz) | 0.6 µV / √Hz | [2] | |
wide band noise (amplification factor 10 x) (1 … 10,000,000 Hz) | 75 µV rms | [2] | |
Spectral noise (1 Hz) | 18 µV / √Hz | [2] | |
spectral noise (10 Hz) | 1.5 µV / √Hz | [2] | |
0.6 µV / √Hz | [2] | ||
spectral noise (1,000 Hz) | 0.6 µV / √Hz | [2] | |
spectral noise (10,000 Hz) | 0.6 µV / √Hz | [2] | |
Wide band noise (gain 10 mV / pC) (1 … 10,000 Hz) | 52.0 µV/rms | [2] | |
spectral noise (1 Hz) | 14.0 µV / √Hz | [2] | |
spectral noise (10 Hz) | 2.0 µV / √Hz | [2] | |
spectral noise (100 Hz) | 0.7 µV / √Hz | [2] | |
Spectral noise (1,000 Hz) | 0.7 µV / √Hz | [2] | |
spectral noise (10,000 Hz) | 0.7 µV / √Hz | [2] | |
Wide band noise (gai? 100 M? / pC) (1 … 10,000 Hz) | 56.0 µV/rms | [2] | |
spectral noise (1 Hz) | 15.0 µV / √Hz | [2] | |
spectral noise (10 Hz) | 2.0 µV / √Hz | [2] | |
spectral noise (100 Hz) | 0.6 µV / √Hz | [2] | |
spectral noise (1,000 Hz) | 0.6 µV / √Hz | [2] | |
spectral noise (10,000 Hz) | 0.6 µV / √Hz | [2] | |
integrated oscillator circuit (ICP/voltage) (± 2%) | 0.1 V pk | ||
integrated oscillator circuit (load) (±?2 %) | 100 pC pk | ||
oscillator frequency (± 2%) | 100/1,000 Hz | ||
physical properties | |||
electrical connection (sensor input ) | BNC socket | ||
electrical connection (output) | BNC Jack | ||
electrical connection (Ethernet) | RJ45 | ||
Size - height (nominal) | 1.75 in | 44.5 mm | |
size - width (nominal) | 19 in | 482.6 mm | |
Size - depth (nominal) | 13.7 in | 348 mm | |
dimensions | 8 lb | 3.6 kg | |
notes | |||
[1] | for each channel individually configurable,.Setting at the factory: 4 mA (±1. 0 mA). | ||
[2] | typically | ||
[3] | the lower cut-off frequency tolerance: ±25% | ||
[4 ] | Tolerance: ±5% | ||
[5] | to use fuse: T1, 6A | ||
[6] | depending on the bias voltage of the connected Sensor | ||
[7] | details: see PCBs Declaration of conformance PS024 | ||
Accessories | |||
017AXX | cord | -1 | |
EE75 | Configuration software "MCSC" | -1 |