PCB-(M)356A70

PCB-(M)356A70

  • Triaxial vibration sensor with charge output,
  • With drill through,.
  • Measuring range 500 g
  • Sensitivity 2.7 pC/g,.
  • Upper cutoff frequency 5,000 Hz,.
  • Three 5-44 connectors on the side
  •  

    basic data
    sensitivity (±30%)2.7 pC/g0.28 pC/(m/s²) 
     
    range±500 g pk ±4. 905 m/s 2 pk 
     
    frequency range (+ 5%)5,000 Hz [3]
     
    Frequency range (+ 10%)7,000 Hz [3]
     
    resonance frequency≥35,000 Hz  
     
    linearity≤1% [2]
     
    Transverse acceleration sensitivity≤5%  
    conditions of use
    Overload limit (shock)±5. 000 g PK±49. 000 m/s² pk 
     
    Temperature-95 … 490 ° F70 … 254 ° C 
    technical
    capacity240 pF [1]
     
    Insulation resistance (at 70 ° F [21 ° C])> 1.000.000 MΩ  
     
    Insulation resistance (at 490 ° F [254 ° C]) [1]
     
    Output polaritynegative  
    physical properties
    sensor elementceramic  
     
    geometry the sensor elementshear principle  
     
    housing materialtitanium  
     
    sealinghermetic  
     
    Size - length0.73 in18.5 mm 
     
    size - width0.90 in22.9 mm 
     
    size ße - height0.40 in10.2 mm 
     
    mass0.28 oz7.9 grams[1]
     
    electrical connection5-44 coaxial  
     
    Mountinghole  
     
    Assembly torque10 … 20 in-lb113 … 225 NCM 
    notes
    [1]typically  
     
    [2]zero-based balancing line, determined with the method of the smallestSquares  
     
    [3]the lower cut-off frequency depends on the used signal conditioning electronics.  
    Equipment
    039A23Allen wrench, 5/32 "hex-1 
     
    080A90Cyano-1 
     
    081A46mounting screw, 10-32 UNF, 0.56 "long-1 
     
    ACS-1 TFrequency response for Triaxial accelerometer, traceable to NIST, 10 Hz up to the upper 5% frequency-1 
    (P) positive output voltage
        
    (M) metric mounting
    equipment   
     
    M039A23Allen key, 4 mm hex-1 
     
    M081A46mounting screw, M5 X 0.80 X 14 mm-1 

    2 other articles of the same category: